User Guide

NPE-4
6 - Troubleshooting PAMS Technical Documentation
Page 6-30 ãNokia Corporation. Original
Apply a 942.467 MHz (channel 37 + 67.710kHz offset) -80 dBm signal to the RF-connec-
tor (remember to compensate for cable attenuation).
Measuring with an oscilloscope on “RXIINP” or “RXQINP” this picture should be seen on a
working EGSM receiver:
Signal amplitude 950mV
DC offset 1,1V
Frequency 67kHz
If this picture is not seen, then go to troubleshooting.