User Guide

PKD-1 SW security device

SW security device is a piece of hardware enabling the use of the

service software when connected to the parallel (LPT) port of the PC.

Without the device, it is not possible to use the service software.

Printer or any such device can be connected to the PC through the

device if needed.

SB-6 Bluetooth test and

interface box (sales

package)

The SB-6 test box is a generic service device used to perform Bluetooth

bit error rate (BER) testing, and establishing cordless FBUS connection

via Bluetooth. An ACP-8x charger is needed for BER testing and an

AXS-4 cable in case of cordless interface usage testing .

Sales package includes:

•

SB-6 test box

•

Installation and warranty information

SPS-1 Soldering Paste

Spreader

The SPS-1 allows spreading of solder to the LGA components pads over

the rework stencils.

Note: Existing solder paste stencils and component holder

jigs will be supported until January 2009. For all new parts

needing solder paste support after January 1, 2009, please

contact your solder machine manufacturer for the universal

solutions for solder paste application for rework purposes.

SPS-2 Soldering paste

spreader

Note: Existing solder paste stencils and component holder

jigs will be supported until January 2009. For all new parts

needing solder paste support after January 1, 2009, please

contact your solder machine manufacturer for the universal

solutions for solder paste application for rework purposes.

RM-443

Service Devices and Service Concepts

Issue 2 COMPANY CONFIDENTIAL Page 2 –11