User Guide

ST-37 BTHFM rework stencil

ST-37 stencil is used with the RJ-104 rework jig to service the BTHFM

(D6000) module.

ST-40 Rework stencil

ST-40 is a rework stencil that is used with the RJ-93 rework jig to

service the Front End Module (N7520).

SX-4 Smart card

SX-4 is a BB5 security device used to protect critical features in tuning

and testing.

SX-4 is also needed together with FPS-10 when DCT-4 phones are

flashed.

Cables

The table below gives a short overview of service tools that can be used for testing, error analysis and repair

of product RM-176, refer to various concepts.

CA-31D USB cable

The CA-31D USB cable is used to connect FPS-10 or FPS-11 to a PC. It is

included in the FPS-10 and FPS-11 sales packages.

RM-176

Service Tools and Service Concepts Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 4 –11