User Guide

PK-1 Software protection

key

PK-1 is a hardware protection key with a USB interface. It has the same

functionality as the PKD-1 series dongle.

PK-1 is meant for use with a PC that does not have a series interface.

To use this USB dongle for security service functions please register

the dongle in the same way as the PKD-1 series dongle.

PKD-1 SW security device

SW security device is a piece of hardware enabling the use of the

service software when connected to the parallel (LPT) port of the PC.

Without the device, it is not possible to use the service software.

Printer or any such device can be connected to the PC through the

device if needed.

RJ-104 Rework jig

RJ-104 is a rework jig used when servicing the BTHFM (D6000) module.

It is used together with rework stencil ST-37.

RJ-93 Rework jig

RJ-93 is used as a rework jig for the Front End Module (FEM).

This rework jig takes the FEM or power amplifier (PA) module (N7520)

for spreading the soldering paste to the component. Must be used

together with the ST-40 stencil.

SB-6 Bluetooth test and

interface box (sales

package)

The SB-6 test box is a generic service device used to perform Bluetooth

bit error rate (BER) testing, and establishing cordless FBUS connection

via Bluetooth. An ACP-8x charger is needed for BER testing and an

AXS-4 cable in case of cordless interface usage testing .

Sales package includes:

• SB-6 test box

• Installation and warranty information

SPS-1 Soldering Paste

Spreader

RM-176

Service Tools and Service Concepts Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 4 –9