User Guide
• Regulators
• Vibra interface
• Digital interface (CBUS)
EMC ASIP (Appcation Specified Integrated Passive) have been integrated inside the ASIC. It includes biasing
passives for microphone , EMC filter for SIM, microphones etc.
Device memories
RAP memories NOR flash and SDRAM
Modem memory consists of 128 Mbit SDRAM and 128 Mbit NOR flash memories.
Combo memory
The application memory of the device consists of NAND/DDR combo memory. The stacked DDR/NAND
application memory has 512 Mbit of DDR memory and 1024 Mbit of flash memory.
Audio concept
Audio HW architecture
The functional core of the audio hardware is built around two ASICs: RAPIDO engine ASIC and the mixed signal
ASIC Avilma.
Avilma provides an interface for the transducers and the accessory connector. Integrated handsfree stereo
speakers are driven by a D-class audio amplifier TPA2012D2.
There are four audio transducers:
• 7x11 mm dynamic earpiece
• Two 11x15 mm dynamic speakers
• Digital MEMS (microelectromechanical systems) microphone
In addition to the audio transducers, Avilma also provides an output for the dynamic vibra component.
All galvanic audio accessories are connected to the AV accessory connector.
A Bluetooth audio and FM radio module, which is connected to the RAPIDO ASIC supports Bluetooth audio
and FM radio functionality.
RM-176
System Module and User Interface Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 9 –23
Copyright © 2007 Nokia. All rights reserved.










