User Guide

Rx calibration can be done in two different ways, manual tune and sweep mode tune. If the signal generator

in use supports frequency sweep table, the calibration is done in one step.

Steps

1. For manual tuning, set mode to Local in the Operating Mode dropdown menu.

2. In the Tuning menu, choose WCDMA→Rx Calibration .

3. Click Start.

4. Select Band "WCDMA 2100".

5. Click Tune.

6. Setup the signal generator to correspond with the values on the,

Rx Calibration

pop-up window and click

OK.

Figure 58 Pop-up window for WCDMA2100

RM-176

RF troubleshooting Nokia Customer Care

Issue 1 COMPANY CONFIDENTIAL Page 7 –43