User Guide

WW Competence Transfer
CMO Operations & Logistics
MMultimedia Creation & Support CONFIDENTIAL
16.11.2005
16
Service Manual 6280 Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
Page
(27)
9.) Lift up the Engine Module, but bear in mind that the
flex connector is still connected.
10.) Open the flex connector carefully.
11.) Lever out the glued Keymat Assy. 12.) Ensure that no residue of the adhesive remains.
Always use new adhesive when reassemble.
13.) Remove the DC Jack with the DC Plug.
14.) Release the IHF Label with the SRT-6.
15.) Remove the IHF Lid. 16.) Peel up the IHF Label completely. Always use a new
one when reassembly. Ensure that no residues remain.