User Guide

WW Competence Transfer
CMO Operations & Logistics
MMultimedia Creation & Support CONFIDENTIAL
16.11.2005
14
Service Manual 6280 Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
Page (27)
19.) Release the VGA Camera with the SS-51. Hold the
Main Flex near the Camera Socket while removing the
20.) For Assembly: Mind the correct positioning of the VGA
Camera.
21.) Shift the unit into mid position. Release the connector
of the Main Flex Assy.
22.) Slot the flex connector through the C-Cover Assy care-
fully.
23.) Lift the glued Power Switch carefully.
18.) Release the Camera Guide Assy with the SRT-6.
17.) Separate the LCD Module from the Display Metal
Shield.