User Guide

WW Competence Transfer
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
25.11.2005
16
Service Manual 6270 RM-56 Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
Page (29)
9. Note that all screws used in this phone must be renewed
after removal.
10. Release the plastic clips of the Keymat Cover Assy.
11. After releasing the clips, the Keymat Cover Assy can be
removed easily.
12. Remove the screw. For assembly use a torque of 14
Ncm.
13. Release the clips of the Back Cover Assy on both sides
as shown.
14. Carefully lift the Back Cover Assy from one side first.
Place the connector side first when reassemble.
15. The keys are not fixed any more. Do not loose them.
16. Carefully push out the hinge from the SD Door at the
shown side first.