Nokia 6267 User Guide 9200882 Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-210 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. 0434 Copyright © 2007 Nokia. All rights reserved.
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. NO WARRANTY The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia.
Contents For your safety ................................. 6 General information ........................ 9 Access codes ...................................................... 9 Configuration settings service ...................... 9 Software updates........................................... 10 Download content......................................... 10 Nokia support ................................................. 11 1. Get started.................................. 11 Install the SIM card and battery .
Phone software updates .............................. 49 Restore factory settings............................... 49 10.Operator menu.......................... 49 11.Gallery ....................................... 50 Print images .................................................... 50 Memory card................................................... 50 12.Media......................................... 51 Camera.............................................................. Video................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode.
instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies. ■ Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messaging, e-mail, calendar, to-do notes, Java™ games and application, and note application.
General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 47. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 47.
contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia website, www.nokia.com/support. When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. To save the settings, select Show > Save. If required, enter the PIN code supplied by the service provider. To discard the received settings, select Exit or Show > Discard.
■ Nokia support Check www.nokia.com/support or your local Nokia website for the latest version of the user guide, additional information, downloads, and services related to your Nokia product. On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service center at www.nokia.com/repair. 1.
3. Insert the SIM card into the SIM card holder. Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. 4. Replace the battery. 5. Slide the back cover into place. ■ Insert a microSD card 1. Open the memory card holder as shown. 2. Insert the card into the microSD card slot with the gold-colored contact area on the card facing upwards, and press it until it clicks into place. 3. Close the memory card holder.
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. ■ Remove the microSD card You can remove or replace the microSD card during phone operation without switching the phone off. 1. Make sure that no application is currently accessing the micro SD memory card. 2. Open the memory card holder. 3.
The charging time depends on the charger used. Charging a BL-5C battery with the AC-4 charger takes approximately 1 hour and 30 minutes while the phone is in the standby mode. ■ Open and close the phone You open and close the phone manually. When you open the fold of the phone, it opens up to approximately 165 degrees. Do not try to force the fold open more. Depending on the theme, a tone sounds when you open and close the phone.
■ Antenna Your device has an internal antenna. Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life. 2.
11 Mini display 12 Music key; rewinds current track (press and hold) or skips to previous track (short key press) 13 Music key play/pause 14 Loudspeaker 15 Music key; fast forwards current track (press and hold) or skip to next track (short key press) 16 Camera key 17 Volume down key 18 Volume up key/PTT key 19 Camera flash 20 2-megapixel camera 21 Headset connector 22 USB port 23 Charger connector 24 Memory card slot Warning: The scroll key and the middle selection key (6) in this device may contain nicke
■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
To access active standby applications, first scroll up, and then scroll to the application, and select Select or View. To select an application or event, scroll to it and press the scroll key. To end the active standby navigation mode select Exit. To switch the active standby mode off, select Options > Active standby sett. > Active standby mode > Off. To organize and change the active standby mode, activate the navigation mode, and select Options > Personalise view or Active standby sett..
If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. The loudspeaker is activated, or the music stand is connected to the phone. Calls are limited to a closed user group. The timed profile is selected. , , , or A headset, handsfree, loopset, or music stand enhancement is connected to the phone. ■ Flight mode You can deactivate all radio frequency functions and still have access to offline games, the calendar, and phone numbers.
■ Keypad lock (keyguard) Select Menu or Unlock and press * within 1.5 seconds to lock or unlock the keypad. If the security keyguard is activated, enter the security code if requested. To answer a call when the keyguard is on, press the call key or open the phone. When you end or reject the call, the keypad automatically locks. For Security keyguard, see “Phone,” p. 46. When the keyguard is on, calls may be possible to the official emergency number programmed into your device.
Speed dialing Assign a phone number to one of the speed-dialing keys, 3 to 9. See “Speed dialing,” p. 37. Call the number in either of the following ways: • Press a speed-dialing key, then the call key. • If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in “Call,” p. 45. Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. Voice commands are language-dependent.
To activate the Call waiting function, see “Call,” p. 45. ■ Options during a voice call Many of the options that you can use during a call are network services. For availability, contact your service provider. During a call, select Options and from the following: Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record or Loudspeaker.
2. Press and hold the call key, or select Options > Video call. Starting a video call may take a while. Video call and an animation are shown. If the call is not successful (for example, video calls are not supported by the network or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead. Tip: To increase or decrease the volume during a call, press the volume keys.
To pause video sharing, select Pause. The middle selection key changes to Continue. To resume the video sharing select Continue. The middle selection key changes to Pause. To end a video sharing session, select Stop. Video sharing ended is shown to both participants. To check availability and costs, and to subscribe to the service, contact your network operator or service provider. 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input.
■ Predictive text input Predictive text input is based on a built-in dictionary to which you can add new words. 1. Start writing a word using the keys, 2 to 9. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. 2. When you finish writing the word and it is correct, to confirm it, press 0 to add a space. If the word is not correct, press * repeatedly, and select the word from the list.
6. Messaging You can read, write, send, and save text messages, multimedia messages, e-mail messages, audio messages and flash messages. All messages are organized into folders. ■ Message Creating a message Creating a new message is by default a text message but changes automatically into multimedia message when files are added. Text messages (SMS) With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).
3. Write your message in the Text: field. To use a text template, scroll down and select Insert. 4. To send the message, select Send, or press the call key. Read and reply to a text message 1. To view a received message, select Show. To view it later, select Exit. To read the message later, select Menu > Messaging > Inbox. 2. To reply to a message, select Reply. Write the reply message. To add a file scroll down, and select Insert. 3. To send the message, select Send, or press the call key.
Note: Your device may indicate that your message was sent to the message center number programmed into your device. Your device may not indicate whether the message is received at the intended destination. For more details about messaging services, contact your service provider. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder.
■ Nokia Xpress audio messaging You can use the multimedia message service to create and send an audio message in a convenient way. MMS must be activated before you can use audio messages. Create a message 1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see “Voice recorder,” p. 56. 2. Speak your message. 3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number. 4. To send the message, select Send, or press the call key.
Your phone has templates. To access the template list, select Menu > Messaging > Create message > Templates. To create a new template, write a message, and select Options > Save message > Save as template. ■ E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account. This e-mail application is different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system.
2. Enter the recipient’s e-mail address, write the subject, and enter the message. To attach a file, select the Insert button and from the options. 3. To send the e-mail message, select Send. If more than one e-mail account is defined, select the account from which you want to send the e-mail. To save your e-mail, select Options > Save message. To edit or continue writing your e-mail later, select As draft message.
■ Voice messages The voice mailbox is a network service and you may need to subscribe to it. For more information contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice msgs.. To enter, search for, or edit your voice mailbox number, select Voice mailbox no.. If supported by the network, mailbox number, select Listen. indicates new voice messages.
Select Menu > Messaging > Message settings > General settings and from the following options: Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder Overwriting in Sent > Allowed — to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you select Save sent messages > Yes.
Multimedia messages The message settings affect the sending, receiving, and viewing of multimedia messages. You may receive the configuration settings for multimedia messaging as a configuration message. See “Configuration settings service,” p. 9. You can also enter the settings manually. See “Configuration,” p. 47.
New e-mail notif. — to select whether a notification is shown when new e-mails are received Allow mail reception — to select whether e-mails can be received in a foreign network or only in home network Reply with orig. msg. — to select if original message is included in reply Image size in e-mail — to select the size of images in e-mails Edit mailboxes — to add new mailboxes or edit one in use 7. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory.
Make sure that the memory in use is Phone or Phone and SIM. See “Settings,” p. 37. Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the available options. ■ Copy or move contacts You can move and copy contacts from the phone memory to the SIM card memory, or vice versa. The SIM card can save names with one phone number attached to them. To move or copy contacts one by one, select Menu > Contacts > Names.
To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the available options. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card.
To make a call using the speed-dialing keys, see “Speed dialing,” p. 21. 8. Log The phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log.
■ Themes A theme contains elements for personalizing your phone. Select Menu > Settings > Themes and from the following options: Select theme — to set a theme. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See Personalise in “Profiles,” p. 38.
Cell info display > On — to display the cell identity, if available from the network ■ Mini display Select Menu > Settings > Mini display and from the available options: Wallpaper — to add the background image in the standby mode Screen saver — to enable a screen saver that will be activated after a selected time, if there is no action in the phone Power saver — enabling the power saver allows you to save some battery power Sleep mode — enabling the sleep mode allows you to save some battery power Fold ani
Organise — to rearrange the functions on your personal shortcut list Right selection key To select a function from the list, select Menu > Settings > My shortcuts > Right selection key. Navigation key To assign other phone functions from a predefined list to the scroll key, select Menu > Settings > My shortcuts > Navigation key. Active standby key To select a function from the list, select Menu > Settings > My shortcuts > Active standby key.
Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: SIM access, object push, file transfer, dial -up networking, headset, hands-free, service discovery application, generic access, serial port and generic object exchange. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model.
phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer. Packet data connection (GPRS) General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an internet protocol (IP)-based network. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data conn.
To copy or synchronize data from your phone, the name of the device and the settings must be in the list of transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server sync and PC synchronisation are the original items in the list.
Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete. USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode.
Speed dialling > On — to dial the names and phone numbers assigned to the speed-dialing keys, 3 to 9, by pressing and holding the corresponding number key Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 21.
Help text activation — to select whether the phone shows help texts Start-up tone > On — the phone plays a tone when it is switched on Flight query > On — the phone asks every time when it is switched on whether the flight profile shall be used. With the flight profile all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions.
Select Menu > Settings > Security and from the following options: PIN code request or UPIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. PIN2 code request — to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
To view the permissions for a protected file, scroll to the file, and select Options > Activation keys. For example, you can see how many times you can view a video or how many days you have left for listening to a song. To extend the permissions for a file, select Options and the corresponding option for the file type, such as Activate theme. You can send certain types of protected files to your friends, and they can buy their own activation keys.
11. Gallery In this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or a microSD memory card (not included in sales pack) and may be arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.
Format the memory card When a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. To format a memory card, select Menu >Gallery or Applications, the memory card folder , and Options > Format memory card > Yes. When formatting is complete, enter a name for the memory card.
Take a self-portrait Close the fold and press and hold the camera key. Use the mini display as a view finder. Press the camera key to take the photo. Open the phone to view the captured picture. Zoom In camera or video mode use the volume keys to zoom in and out. Your device supports an image capture resolution up to 1200x1600 pixels. Camera options Select Options > Night mode on if the lighting is dim, Self-timer on to activate the self-timer, or Image sequence on to take images in a fast sequence.
Record a video clip Select Menu > Media > Video > Record or press and hold the camera key. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To zoom in or out, press the volume key up or down, or scroll left and right.
To stop the playing, press and hold the end key. To skip to the next track, select track, select . . To skip to the beginning of the previous To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want. Music player options Select Menu > Media > Music player > Go to Music player.
Save radio frequencies 1. To start the search, select and hold 0.05 MHz steps, briefly press or or . . To change the radio frequency in 2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the radio station. Listen to the radio Select Menu > Media > Radio.
■ Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later. The recorder cannot be used when a data call or GPRS connection is active. Voice recorder 1. Select Menu > Media > Voice recorder. To use the graphical keys , the desired key, and select it. , or on the display, scroll left or right to 2. To start the recording, select .
To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set the radio as the alarm tone, select Alarm tone:. If you select the radio as an alarm tone, connect the headset to the phone. To set a snooze time-out, select Snooze time-out and the time. Stop the alarm The phone sounds an alert tone even if the phone was switched off.
Note alarm The phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save a note for a task that you must do, select Menu > Organiser > To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add.
Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared. ■ Countdown timer To start the countdown timer, select Menu > Organiser > Countd. timer > Normal timer, enter the alarm time, and write a note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.
14. Push to talk Select Menu > Push to talk. Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people (channel) having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator.
Channel security: — Select Public channel or Private channel. Image: — Select Change and an image from the Gallery or the Default graphic to set a graphic for the new channel. To send an invitation to the channel, select Yes when the phone requests it. The recipient of the invitation is added to the member list of the channel when the invitation is accepted. To send further invitations, select Menu > Push to talk > Channel list, a channel, and Options > Send invitation.
To make a channel call, a one-to-one call, or a call to multiple recipients, press and hold the PTT key as long as you talk. To listen to the response, release the PTT key. You may be able to check the login status of your contacts in Menu > Push to talk > Contacts list. This service depends on your network operator and is only available for subscribed contacts. To subscribe a contact, select Options >Subscribe contact, or if one or more contacts are already marked, Subscribe marked.
3. Press and hold the PTT key to talk. Release the PTT key to hear the response. 4. Press the end key to terminate the call. Receive a PTT call A short tone notifies you of an incoming PTT call. Informations such as the channel, the phone number, or the nickname (network service) of the caller are displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls.
To make a one-to-one call, select the desired request, and press and hold the PTT key. To send a call request back to the sender, select Options > Send PTT callback. To delete the request, select Delete. To save a new contact or to add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact.
PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No — to hide your PTT address from channel and one-toone calls ■ Configuration settings You may receive the settings for connecting to the service from your service provider. See “Configuration settings service,” p. 9. You can enter the settings manually. See “Configuration,” p. 47.
To set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings. For more options, see “Application options,” p. 66. ■ Launch an application Your phone software includes some Java applications. Select Menu > Applications > Collection. Scroll to an application, and select Open.
16. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. Accessing these services may involve sending messages or making a phone call for which you may be charged. 17.
2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 67. 3. Select Account and a browsing service account contained in the active configuration settings. 4. Select Displ. term. window > Yes to perform manual user authentication for intranet connections.
2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third party sites are not affiliated with Nokia and Nokia does not endorse or assume liability for them.
■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 71. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
To set whether you want to receive service messages, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Autom. connection > On.
authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown even if the certificate should be valid, check that the current date and time in your device are correct. Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.
18. PC connectivity You can send and receive e-mail, and access the internet when your phone is connected to a compatible PC through a Bluetooth or a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote internet server (network service).
For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. ■ Nokia battery authentication Always use original Nokia batteries for your safety.
4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste. Return the products to collection to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources.
Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body.
• Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.
Index A access codes 9 accessories. See enhancements. activation keys 49 active standby mode 17, 39 alarm clock 56 antenna 15 applications 65 audio messages 29 B barring password 9 battery authentication 75 charging 13 charging, discharging 74 installation 11 Bluetooth 42, 73 bookmarks 68 browser appearance settings 69 bookmarks 68 security 70 setting up 67 business cards 37 C cache memory 71 calculator 58 calendar 57 call functions 20 call key 15 call log 38 call register. See call log.
handsfree. See loudspeaker. Headset connector 16 menu 25 message center number 26 message folders 29 message settings e-mail 34 general 32 multimedia messages 34 text messages 33 messages audio messages 29 deleting 32 flash messages 28 info messages 32 length indicator 26 service commands 32 settings 32 voice messages 32 mini display 16, 17 MMS. See multimedia messages.
play 16 plug and play service 14 POP3 30 predictive text input 24, 25 profiles 38 protected files 49 PTT. See push to talk.
W X wallpaper 39, 40 web 67 wireless markup language (WML) 67 wrist strap 14 writïng text 24 XHTML 67 86 Z zoom key 16
