Cell Phone User Guide

75 Copyright © 2004 Nokia
Settings (Menu 7)
Roaming options
You can set your phone to “roam” or search for another network when you are not in
your home area.
1. At the start screen, select Menu > Settings > Network > Roaming options.
2. Select one of the following options:
Home only—You can make and receive calls in your home area only.
Automatic—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
3. Press OK, if necessary, to confirm the activation.
Mode
You can choose whether your phone uses digital or analog service.
1. At the start screen, select Menu > Settings > Network > Mode.
2. Select one of the following service options:
Digital preferred—The phone works in digital mode, but will also work in analog
mode when digital mode is unavailable.
Digital only—The phone only works in digital mode.
Analog only—The phone only works in analog mode.
■ Network services
The following features are network services. See “Network Services”, page 7 for
more information.
Store a feature code
1. At the start screen, select Menu > Settings > Network services > Network
feature setting.
2. Enter the feature code from your service provider (for example, *633), and press OK.
3. Select the type of forwarding that matches the feature code you entered
(for example, Call forwarding).
The activated feature code is now stored in your phone, and you are returned to
the Feature code: field. Continue entering other feature codes (for example,
*633), or press the End key to return to the start screen.
Note: Once you enter a network feature code successfully the feature
becomes visible in the Network services menu.