Cell Phone User Guide

36 Copyright © 2004 Nokia
Insert dialing codes
Press the * key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the Call key before sending the numbers or codes that follow.
Setup voice mail with dialing codes
Note: If the Right selection key on your phone has a network operator
menu, select Menu > Contacts instead of Names.
1. At the start screen, select Names > 1-touch dialing.
2. Scroll to an (empty) 1-touch dialing slot and press Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from “Setup voice mail with dialing codes”, page 36.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6. Enter a name (such as Voice Mail), and press OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key
at the start screen.
■ Web messages
Web messaging is a network service. See “Network Services”, page 7 for
more information.
If your wireless service provider supports this feature, you can use the Minibrowser
to check for e-mail messages. At the start screen, select Menu > Messages > Web
messages > Connect.
See “Mobile Web (Menu 9)”, page 83 for more information on using the Minibrowser
in your phone to access web pages.