Cell Phone User Guide

35 Copyright © 2004 Nokia
Messages (Menu 1)
Call and setup your voice mail
1. Once you have saved the voice mailbox number, press and hold the 1 key.
2. When you connect to voice mail and the prerecorded greeting begins, follow the
service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the voice mailbox number in one of
five ways:
• Dial the number using the keypad.
•Press and hold the 1 key.
•Press the 1 key and the Send key.
•Press Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages > Listen to
voice messages.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow them
in the dialing string.
Note: Voice mail services vary by service provider. The following
instructions are examples of common operations. Please check with your
service provider for specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Be precise; you will need this information in “Setup voice mail with dialing codes”,
page 36.