User Guide

6255/6255i/6256/6256i (RM-19)

RF Description and Troubleshooting Nokia Customer Care

Figure 14: RF PDM Control dialog box for Cell band

12. Click Read Phone to update the values.

PCS Setup

Use the following procedures to prepare for PCS Tx troubleshooting using Phoenix.

1. Connect an RF test connector to a call box.

2. Connect the mobile terminal to the PC via a test jig. (The bottom connector is a

USB port.)

3. Connect a power supply to the mobile terminal.

4. Open the Troubleshooting menu, and point to Phone Control.

The Phone Control dialog box appears. (See Figure 9 on page 16.)

5. Click the LOCAL button in the Phone State area to put the mobile terminal into

Local Mode.

6. Open the Troubleshooting menu, point to RF, and click RF Main Mode.

The RF Main Mode dialog box appears. (See Figure 12 on page 18.)