User Guide

Messages
32
Listen to voice messages
Once you have set up voice mail, press and hold 1 or use the Messages menu to
dial the voice mailbox number. Once you connect and the prerecorded greeting
begins, follow the automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow them
in the dialing string. See "Setup phone numbers with dialing codes," p. 38.
Voice mail services vary by service provider. The following instructions are examples
of common operations. Please check with your service provider for specific
instructions on using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voice mail service may vary. However, it should
look something like this:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.
Be precise; you will need this information to "Setup phone numbers with dialing
codes," p 38.
Clear voice mail icon
To clear the voice mail icon from the display, at the start screen, select Menu >
Messages > Voice messages > Clear voice mail icon.
■ Web messaging
Web messaging is a network service. See "Network Services," p. 5.
If your wireless service provider supports this feature, you can use the Minibrowser
to check for e-mail messages. At the start screen, select Menu > Messages >
Minibrowser messages > Connect.
See "Mobile internet access," p. 77, for more information on using the
Minibrowser in your device to access Web pages.