User Guide

6235/6235i/6236i (RM-60)
RF Description and Troubleshooting
Page 20 ©2005 Nokia Corporation Company Confidential Issue 1 04/2005
Transmitter Output Spectrum
Following is the correct output of the mobile terminal on a spectrum analyzer with
100MHz span. Note that if you are using the AAS-10 probe with the mobile terminal
connected to the call box, the amplitude should be approximately -7dBm at the antenna
test point on the top of the PWB.
Figure 14: Correct output spectrum
Following is an example of incorrect output.
Figure 15: Incorrect output spectrum