User Guide

Nokia Customer Care RF Description and Troubleshooting

6235/6235i/6236i (RM-60)

you are using:

•"AMPS Tx Setup"onpage11

•"Cell Tx Setup"onpage14

•"PCS Setup"onpage16

AMPS Tx Setup

Use the following procedures to prepare for AMPS Tx troubleshooting using Phoenix.

Note the 6236i variant does not support AMPS.

1. Connect the RF test connector to a spectrum analyzer.

2. Connect the mobile terminal to the PC via a test jig. (The bottom connector is a

USB port.)

3. Connect a power supply to the mobile terminal.

4. Open the Troubleshooting menu, and click Phone Control.

The Phone Control dialog box appears.

5. Click the LOCAL button in the Phone State tab to put the mobile terminal into

Local Mode.

Figure 7: Phone Control dialog box

6. Open the Troubleshooting menu, point to AMPS, and click AMPS Control.