User Guide

Training and Vendor Development

CMO Operations & Logistics

Multimedia Creation & Support CONFIDENTIAL

25.Apr.2006

Service Manual 6233 RM-145 / 6234 RM-123

Approved 1.0

MGR

Page (19)

7. This picture shows the position of the holding clips on the

right side of the unit.

8. Bring the SRT-6 exactly to the position over the (invisible) clips.

NOTE! A little sliding motion could be needed (like a ‘credit card’)

when releasing the snaps. Do not damage the edges of the A-

COVER.

9. Stick the SRT-6 between the cover and release the four clips.

10. Remove the A-COVER and protect the inner window with a

protective lm.

11. Protect the LCD MODULE with a protective lm.

12. Press out the KEYMAT.