User Guide

CCS Technical Documentation Service Software Instructions
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 73
Repeat the same tuning steps as for the EGSM900 band above.
Tuning will automatically move to the next step, EGSM1800 with EDGE on when you
press “Save & Continue”.
GSM1800 band with EDGE On
Choose “Start” to begin tuning.
Set the spectrum analyzer to required settings for GSM1800 band => OK.
Repeat the same tuning steps as for the EGSM900 band above.
Tuning will automatically move to the next step, EGSM1900 with EDGE off when you
press “Save & Continue.
GSM1900 band with EDGE Off
Choose “Start” to begin tuning.
Set the spectrum analyzer to required settings for GSM1900 band=> OK.
Repeat the same tuning steps as for the EGSM900 band above.
Tuning will automatically move to the next step, EGSM1900 with EDGE on when you
press “Save & Continue”.
GSM1900 band with EDGE On
Choose “Start” to begin tuning.
Set the spectrum analyzer to required settings for GSM1900 band=> OK.
Repeat the same tuning steps as for the EGSM900 band above.
Tuning will be completed when you press “Save & Continue”.
Choose “OK” to close the “TX I/Q Tuning” dialog.