User Guide

CCS Technical Documentation Service Software Instructions
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 71
Set spectrum analyzer to required settings => OK
The tuning is carried out by setting each of the sliders to desired value. The sliders can be
changed only when the tuning is ongoing.
The order of tuning should be the same as the order of the sliders e.g. the Tx I DC Offset
is tuned first and Phase difference is tuned last.
Use <= , =>, PgUp or PgDn keys
The tuning is performed by setting each of the sliders to desired value.
Tune LO leak to minimum with TXI/TXQ DC offset control (f0 on spectrum analyzer
screen).
Tune the wrong sideband to minimum using Amplitude/Phase difference controls