User Guide

CCS Technical Documentation Service Software Instructions
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 59
GSM1900 band
Repeat the same steps as for the EGSM900 and GSM1800 bands above.
Typical values and limits in Rx Band Filter Response Compensation GSM1900:
Tuning will be completed when you press “Save & Continue”.
Close the “RX Band Filter Response Compensation” dialog to end tuning.
RX AM suppression
RF generator needed (AM modulation).
Must be performed separately on all bands!
Start the RX calibration at EGSM (GSM900), then continue to the GSM1800 band and
finally to the GSM1900 band.
This tuning performs RX AM suppression tuning.
Channel
Input
frequency
[MHz]
Typical value
[dB]
Low limit
[dB]
High limit
[dB]
496 1927.06771 +-3 -10 5
512 1930.26771 +-1 -5 5
537 1935.26771 +-1 -5 5
586 1945.06771 +-1 -5 5
661 1960.06771 +-1 -5 5
736 1975.06771 +-1 -5 5
794 1986.66771 +-1 -5 5
810 1989.86771 +-1 -5 5
835 1994.86771 +-3 -10 5