User Guide

CCS Technical Documentation Service Software Instructions
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 41
If the firmware version read from your JBV-1 is not the latest one available (v. 17 or
older), it needs to be updated to version 18 by choosing “Update Firmware”.
If you simply want to check the SW version, choose “Refresh Status”.
To update your JBV-1 to a new version, 18 choose file JBV1v18.CDE and “Open”.
Please wait, it takes a while until you can hear a “click” from the JBV-1.
The older sw file JBV1v17.CDE is visible in this view only if the previous JBV-1 SW pack-
age has been installed on your computer.
After a successful update, the current JBV-1 status will be shown after you choose “OK”.