User Guide

CCS Technical Documentation Service Software Instructions
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 37
JBV-1 Docking Station SW
The JBV-1 Docking Station is a common tool for all DCT-4 generation products.
In order to make the JBV-1 usable with different phone models, a phone specific Docking
Station Adapter is used for different service functions.
The JBV-1 Docking Station contains Software (Firmware) which can be updated.
You need the following equipment to be able to update JBV-1 software:
• PC with USB connection
• operating System supporting USB (Not Win 95 or NT)
• USB Cable (Can be purchased from shops or suppliers providing PC hardware and
accessories)
• JBV-1 Docking Station
• external Power Supply 11-16V
Before installation
• Download Jbv1_18_update.zip – file to your computer (e.g. C:\TEMP) from your
download web site.
• Close all other programs.
• Follow the instructions on the screen.
Installing SW needed for the JBV-1 SW update
Note: DO NOT CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER YET!
Run Jbv1_18_update.zip file and start the SW installation by double clicking Setup.exe.
Files needed for JBV-1 Package setup program will be extracted.