User Guide

CCS Technical Documentation

RH-12/RH-28 Series Transceivers

Issue 1 02/04 Nokia Corporation

5 - Disassembly Instructions

PAGE 1
CCS Technical Documentation RH-12/RH-28 Series Transceivers 5 - Disassembly Instructions Issue 1 02/04 Nokia Corporation
PAGE 2
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation [This page left intentionally blank] Page 2 Nokia Corporation Issue 1 02/04
PAGE 3
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation Table of Contents Page No Disassembly Procedure .................................................................................................. 5 Reassembly Procedure ...................................................................................................
PAGE 4
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation [This page left intentionally blank] Page 4 Nokia Corporation Issue 1 02/04
PAGE 5
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation Disassembly Procedure Remove the B-cover assy. Remove the A-cover assy.
PAGE 6
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation Remove the Antenna assy. Use the SRT-6 OPENING TOOL (Part code: 0770431) when removing the Antenna assy.
PAGE 7
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation Reassembly Procedure Mount the antenna assy. 2 1 Mount the A-cover assy.
PAGE 8
RH-12/RH-28 Disassembly Instructions CCS Technical Documentation Mount the B-cover assy. 2 6 Page 8 5 3 4 Mount the screws. Use a flathead Torx 6IP 1.8 x 7.4 screwdriver to fasten the screws in the order shown in the diagram. Torque 30Ncm at 650RPM.