User Guide

CCS Technical Documentation Car Installation Kit
RH-12/RH-28
Issue 1 02/04 Nokia Corporation Page 9
Swivel mount HHS-15 and Mounting plate MKU-1
The HHS-15 is a swivel mount which offers two installation methods for the MBC-15S
holder. Either use all the components to make a swivel mounting, or use the flat mount-
ing plate for a fixed position.
For an exploded view, see the following figure.
Figure 2:
Mounting plate MKU-1
The HFU-4 handsfree unit is attached to the vehicle’s interior using the MKU-1 mounting
plate. The mounting is secured with a screw (included with MKU-1).
Handsfree unit HFU-4
The HFU-4 handsfree unit enables the phone to operate in handsfree mode. It is attached
to the vehicle’s interior using the MKU-1 mounting plate. The mounting is secured with a
screw (included with MKU-1).
System cable SCU-4
The system cable SCU-4 plug-in connector connects to the PHONE socket in HFU-4 and
to the bottom connector underneath the AXF-15S. (The other cable from the AXF-15S
connects to the external antenna.) For a diagram, refer to Figure 1.
Antenna coupler AXF-15S
The Antenna coupler AXF-15S is used to create a contact with an external antenna. It is
installed between MBC-15S and HHS-15, and secured with a screw (included with AXF-
15S). For a diagram, refer to Figure 2.