User Guide

CCS Technical Documentation Troubleshooting - GPS
RH-27
Issue 1 11/2003 Confidential ©2003 Nokia Corporation Page 7
GPS RF Probing Setup
1 Turn on the GPS Receiver
2 Inject -25dBm tone @ 1575.52MHz at GPS Connector (X001) with signal gener-
ator or Call Box.
3 Continue to the GPS RF Probing Diagram diagram which follows, and measure
probe points with either a FET probe and a spectrum analyzer set at center fre-
quency 1575.25MHz, Span = 500kHz, or a voltmeter as specified.
Signal Generator
RF OUT
Signal Generator
RF OUT