User Guide

RH-27

Disassembly CCS Technical Documentation

11. Note! The UI Module and the engine board are linked

together by two board-to-board connectors. Be careful

not to damage them.

12. Remove the Microphone by pressing it from its

edge or take the tweezers between the frame and the

microphone and lift it out from the frame.

13. Remove the Speaker by lifting it from the guiding

pin.

Note! The speaker is attached into the frame by adhe-

sive tape. Therefore, it may not loosen easily.

14. To remove the Display shield, open the snaps from

both sides by using the specified tool and remove the

shield.

15. To remove the Display shield, open the snaps from

both sides by using the specified tool and remove the

shield.

Note! Be careful not to damage the shield.

16. To remove the LCD Module, keep it on a table by

using a soft cloth, and flip the LCD frame gently until

the LCD Module detaches.

Note! Be careful not to damage the sensitive parts. Do

not press the LCD module.

Step-by-Step Disassembly Instructions (Model 6225)