CCS Technical Documentation RH-27 Series Transceivers Disassembly Issue 1 11/2003 Confidential ©2003 Nokia Corporation
RH-27 Disassembly CCS Technical Documentation Step-by-Step Disassembly Instructions Alway use ESD protection Disassembly Instructions Step-by-Step Disassembly Instructions (Model 6225) 1. Place the phone face down, press the Release Key, and slide the battery cover downward. 2. Flip gently the A-cover from the down corner. Remove the A-cover. 3. Remove the Keymat. 4. Spread the B-cover from both sides until snaps inside will release it.
RH-27 Disassembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6225) 5. Remove the B-cover. 6. Remove the antenna. Note! Use only a specified opening tool and be careful not to damage the mechanical parts. Do not touch the antenna plate inside without gloves. 7. Remove the screws (6 pieces) to get the module out of the C-cover. 8. Remove the module from the C-cover. Note! Always use the specified tools. 9. Remove the UI Module from the engine board. 10.
RH-27 Disassembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6225) 11. Note! The UI Module and the engine board are linked together by two board-to-board connectors. Be careful not to damage them. 12. Remove the Microphone by pressing it from its edge or take the tweezers between the frame and the microphone and lift it out from the frame. 13. Remove the Speaker by lifting it from the guiding pin. Note! The speaker is attached into the frame by adhesive tape.
RH-27 Disassembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6225) 17. To remove the LCD Module, keep it on a table by using a soft cloth, and flip the LCD frame gently until the LCD Module detaches. Note! Be careful not to damage the sensitive parts. Do not press the LCD module. 18. Remove the UI board from the LCD frame. Note! The UI board is attached into the frame by adhesive tape. Therefore, it may not loosen easily. Be careful not to damage the LCD frame. 19.
RH-27 Disassembly CCS Technical Documentation Step-by-Step Disassembly Instructions (Model 6225) 23. Remove the Release Key by pressing the snaps toward the center from the inside.
