User Guide

CCS Technical Documentation RH-20 Disassembly and Assembly Instruc-
Company confidential RH-20
Issue 1 10/2003 Nokia Corporation. Page 17
Disassembly and Reassembly Instructions for Camera Module
Remove Connector Shield when cleaning contacts or
changing Camera Module.
Camera Module is attached with four snaps into its
guidance. Place SRT-10 as shown in the picture and unlock
the snaps on both sides. Note releasing order.
Remove Camera Module carefully. Take care that Camera
marking shows to right side when assembling.
Do not touch contacts and camera lens. Use always
SRT-10 for assembly and disassembly.
Shift the SRT-10 into the camera groove. Take the Camera Module carefully and note the marking.