User Guide

µSD card interface

Figure 30 µSD card interface

The µSD card is connected to the engine by an external level shifter. Supplied voltages:

• VMMC: 2.85 V (from level shifter)

• VIO: 1.8 V (from AVILMA)

The card removal is detected by a push detect switch.

Hot swap is supported, which means that the card may be plugged in/out at any time, without removing the

battery.

User interface

Display module

The interconnection between the LCD module and the engine is implemented with a 24-pin board-to-board

connector.

The LCD module does not require any tuning in service.

Backlight and illumination

The display has no separate backlight, it is included in the display module.

The keypad, placed on the main board, is top lit by 7 LEDs.

Camera concept

This phone has two cameras:

• A main 2.0 megapixel camera with 8x zoom and a LED flash.

RM-396

System Module Description

Page 5 –12 COMPANY CONFIDENTIAL Issue 1