Customer Care Solutions NPL-3 Series Transceivers Service tools Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation Table of Contents Page No DA-19 Docking Adapter ................................................................................................3 MJS-38 Module Test Jig ................................................................................................5 MJS-90 Soldering Jig .....................................................................................................6 FPS-8 Flash Prommer (Sales Pack) .................
Company confidential CCS Technical Documentation NPL-3 Service tools DA-19 Docking Adapter The DA-19 Docking Station Adapter is used only with JBV-1 Docking Station. It has been designed for calibration and soft ware update use. The Docking Station Adapter makes signal connections to the phone.
NPL-3 Service tools Company confidential CCS Technical Documentation View of DA-19 Page 4 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools MJS-38 Module Test Jig Module Testg Jig MJS-38 is designed for regional Central Services for WV8 module testing. It can be used for flashing and RF-, battery-, system-, radio- and SIM reader testing. Product Code MJS-38 Module Test Jig: 0770416 View of MJS-38 Note: The nominal supply voltage for MJS-38 is +4.2 V. The supply voltage must not exceed +5.0 V (min 3V).
NPL-3 Service tools Company confidential CCS Technical Documentation MJS-90 Soldering Jig MJS-90 Soldering Jig is used for soldering and as a rework jig for WV8 module. Product Code MJS-90 Module Jig: 0770493 View of MJS-90 Page 6 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools FPS-8 Flash Prommer (Sales Pack) The Flash Prommer FPS-8 is used with e.g. DA-19 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply.
NPL-3 Service tools Company confidential CCS Technical Documentation FPS-8C Parallel Flash Prommer (Sales Pack) The Parallel Flash Prommer FPS-8C is used with DA-19 and JBV-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. SF11C card is functionally identical to FPS-8. Sales package code FPS-8C Parallel Flash Prommer: 0080396 View of FPS-8C Page 8 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output. Product Code ACF-8 Universal Power Supply: 0680032 View of ACF-8 CF-8 Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation FLA-27 POS (Point Of Sale) Flash Loading Adapter FLA-27 POS Flash Loading Adapter is used in place of the phone's normal battery during service, to supply a controlled operating voltage. Product Code FLA-27 POS Flash Loading Adapter: 0770492 View of FLA-27 Page 10 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools Note! The following instructions must be followed when using Service Accessories designed for Nokia NPL-3 product. Otherwise, the sensitive parts may damage, and the accessory becomes useless. FLA-27, POS Flash Adapter 1 Hold the Flash Adapter in one hand and the phone in the other. 2 Put the Battery connector side into its place, and then press the Test probe side and the phone together.
NPL-3 Service tools Company confidential CCS Technical Documentation FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage. Product Code FLC-2 DC Cable: 0730185 View of FLC-2 C-2 Page 12 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools AXS-4 Service Cable The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connec tors e.g. between PC and FPS-8. Cable length is 2 meters. Product code AXS-4 D9-D9 Service Cable: 0730090 View of AXS-4 Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4S to FLA-27. Product code XCS-1 Service Cable: 0730218 View of XCS-1 S-1 Page 14 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools SW Security Device PKD-1 SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Whithout the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if need ed.
NPL-3 Service tools Company confidential CCS Technical Documentation FLS-4S POS (Point Of Sale) Flash Device (Sales Pack) FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. Product Code Sales Pack - Europe/Africa 0080541 Sales Pack - APAC 0080542 Sales Pack - US 0080543 View of FLS-4S Page 16 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 to FPS-8. Product Code PCS-1 Power Cable: 0730012 View of PCS-1 of PCS-1 Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation XRF-1 RF Cable RF cable XRF-1 is used to connect e.g. Module Jig MJS-38 to RF mea surement equipment.. Product code XRF-1 RF Cable: 0730085 View of XRF-1 Page 18 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools DAU-9S FBUS Cable The FBUS Cable DAU-9S has a modular connector, and is used with between PC's serial port and, e.g., Module Jig MJS-38. Product Code DAU-9S FBUS Cable: 0730108 View of DAU-9S Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation SCB-3 DC Cable The DC Cable SCB-3 is used to connect, e.g., JBV-1 to the phone. Product Code SCB-3 DC Cable: 0730114 View of SCB-3 B-3 Page 20 CopyrightãNokia.
Company confidential CCS Technical Documentation NPL-3 Service tools XCS-4 Modular Cable XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. Product code XCS-4 Modular Cable: 0730178 View of XCS-4 Issue 1 3/03 CopyrightãNokia.
NPL-3 Service tools Company confidential CCS Technical Documentation Printer Cable This cable is used to connect the PC to FPS-8. Product code Printer Cable: 0730029 View Printer Cable Cable w ofofPrinter Page 22 CopyrightãNokia.
