User Guide
Table Of Contents
- Service Software Instructions
- Quick Guide for Phoenix Service SW Installation
- Phoenix Service SW
- Data Package for Phoenix (Product Specific)
- How to Update Flash Support Files for FPS-8* and FLS-4S*
- FPS-8 Activation and Deactivation
- JBV-1 Docking Station SW
- Receiver tuning: Quick Guide for Tuning With Phoenix
- Service Tool Concept for RF Tuning Operations
- Autotuning
- Receiver Manual Tuning
- Transmitter Manual Tuning
- Service Tool Concept For Baseband Tuning Operations
- Baseband Tuning operations
- Flashing Setup Instructions
- BACK TO MAIN PAGE
NPL-3
CCS Technical Documentation
Page 74 Copyright ãNokia. All rights reserved. Issue 1 3/03
Service Tool Concept For Baseband Tuning Operations
EM calibrations should be carried out in JBV-1 Docking Station equipped with DA-19
Docking Station Adapter.
Note: RF tunings must be carried out in MJS-38 module jig, JBV-1.
Power to JBV-1 should be supplied from an external DC power supply, not FPS-8 prom-
mer.
JBV-1 input voltages:
Maximum +16 VDC
Nominal input for RF tunings is +12 V DC.