OWNER’S MANUAL
Keys Power key Press and hold to turn your phone on or off. Fixed antenna Do not attempt to extend or remove! Volume button Adjusts volume of earpiece or speaker. Softkeys Scroll button Scroll through menus, submenus, and phone book. Press and hold for continuous scrolling. ó Dials the number on the display. 0HQX 1DPHV Their current function is displayed above the key (for example, here their functions are “Menu” and “Names”).
Indicators and Icons Line 1 is selected for outgoing calls (see page 53). Line 2 is selected for outgoing calls (see page 53). You have an active call. The phone is waiting for you to enter a response. Ringing option is set to 6LOHQW and keypad tones, warning tones, and message alert tone are turned off. Keyguard has been activated. Your phone will not accept any keypresses. To deactivate, press 8QORFN, then . Your phone has been set to forward all incoming voice calls to another number.
Contents 1. For Your Safety . . . . . . . . . . . . . . 3 FCC/Industry Canada Notice . . . . . . . . . . . . . . . . . . . . .4 Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 2. Getting Connected . . . . . . . . . . . 5 Installing the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . .5 Battery information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 When is a good time to charge? . . . . . . . . . . . . . . .8 3. The Very Basics . . . . . . . . . . .
1. For Your Safety Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal. For more detailed safety information, see “Important Safety Information” on page 97. Road Safety Comes First Don’t use a hand-held phone while driving; park the vehicle first. Switch Off In Hospitals Follow any regulations or rules. Switch phone off near medical equipment. Switch Off On Aircraft Wireless phones can cause interference.
FCC/Industry Canada Notice Your phone may cause TV or radio interference (e.g. when using a telephone in close proximity to receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
2. Getting Connected So you’ve just bought your new phone, taken it out of the box, and you’re wondering what to do next. To get started, just follow a few easy steps. 1) Install the SIM card 2) Attach and charge the battery 3) If you purchased an optional analog module, attach it to the phone See “Optional Analog Module” on page 84. Note: The analog module is a separate accessory that may be purchased from your service provider. It allows you to make and receive calls in analog networks.
3) Place the SIM card in its slot. Make sure that the bevelled corner is top right and the gold contacts of the card face into the phone. 4) Close the holder 5) Slide the SIM card holder toward the bottom of the phone until it locks into place 6) Attach the battery (see below) Battery information Attaching the battery To attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place.
Attaching the battery when using optional analog module 1) Place the analog module on the back of the phone 2) Slide the module toward the top of the phone until it clicks into place 3) Place the battery on top of the analog module 4) Slide the battery toward the top of the phone until it clicks into place Charging your new battery Your phone is powered by a rechargeable Li-Ion or NiMH battery.
If your phone displays#1RW#FKDUJLQJ, charging is suspended. Check that the battery is connected to an approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating state. If charging still fails, contact your dealer. When is a good time to charge? Actually, you can charge anytime. If you have a NiMH battery, you should allow it to discharge once in a while (see “Discharging NiMH batteries” on page 9).
Can I make calls while charging? Yes, but depending on the charger used, your battery may not charge during a call. Discharging NiMH batteries An NiMH battery lasts longer and performs better if you fully discharge it from time to time. To discharge the battery, leave your phone switched on until the battery is drained. The phone will display several messages that the battery is low and that you need to recharge it; just ignore them.
3. The Very Basics Your phone is designed with many powerful features that you can learn to use as needed. This chapter covers the basic information you need to use your phone. Everything else is covered in “Features A-Z” starting on page 18. Switching on the phone Press and hold the the phone. key for one second to switch on If the phone asks for a PIN code, see “PIN and PIN2 codes” on page 64. If the phone asks for a Security code, see “Security code” on page 72.
Improving your phone’s reception may be easy. Try moving your phone slightly, or move towards a window if you’re calling from inside a building. Making a call Enter the area code and phone number and press ó Making an international call Enter the + character (press twice), country code, area code and phone number. Editing a number on display Press V to move the cursor to the left and W to move it to the right. Press &OHDU to delete the character to the left of the cursor.
Answering a call The phone rings according to the settings in the currently selected profile (see page 65). To answer, press any key except ô or ó answers Note: If Keyguard is on (see page 50), only calls. To reject a call, press ô. ô Note: If you are using the optional analog module, pressing stops the ringing but does not answer or reject the call. Switching off the phone Press and hold the key for one second OR Briefly press the key (6ZLWFK#RII$ will appear, highlighted) then press 2..
4. Working The Menu Your phone contains several menus and submenus, giving you access to certain options and allowing you to customize your phone to suit your individual preferences. Navigating tools Softkeys Your phone has two softkeys that appear below the display. Their current function is indicated by the words appearing above them. Simply press the corresponding key under the choice you wish to select. This illustration shows the phone at the start screen (see “What is the ‘start screen’?” on page 14).
For example, press 0HQX once. The scroll bar appears with the first (top) tab displayed. A different tab appears each time you press the W or V key to move up and down through the menu structure. The scroll bar works the same way with submenus. Menu & submenu numbering When you scroll to a menu or submenu, the menu number and/or submenu number appears on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different menus.
%DFN allows you to exit the present menu or submenu and go back a level. Press repeatedly to return to the main menu, then press ([LW to return to the start screen. ô returns your phone to the start screen. If you when the phone is requesting input (for press example, a setting, phone number, name, etc.), the phone displays the start screen and the input is not saved.
Summary of Menu Items Note: If your phone has a Menu 10, to use shortcuts for Menu 1 you must press 0 first (for example, for 6HUYLFH#FRPPDQG#HGLWRU press 0HQX 0 1 5).
4 Settings 4 1 Call settings 411 412 413 414 415 Automatic redial Call waiting1 Send own number1,4 Line in use1 Calling card 4 2 Security settings 421 422 423 424 425 426 427 SIM card security Phone security Module security5 Restrict calls1 Fixed dialing Call cost limit1 Access codes 4 3 Phone settings 431 432 433 434 435 436 437 438 Language List of own numbers Clock Alarm clock System selection1 Touch tone length Notifications on SIM update Emergency key 9 4 4 Analog module settings5 4 4 1 Digital/
5. Features A-Z Access codes These help protect against unauthorized use of your phone and SIM card: • security code (see page 72) • PIN and PIN2 codes (see page 64) • system password (see page 77) • module code (for optional analog module; see page 87) Access codes consist of numbers. If the phone asks you for one of these codes, key in the requested code and press 2.. If you make a mistake, press &OHDU to erase, then enter the correct digit.
Setting the alarm clock 1) Press 0HQX 4 3 4 (6HWWLQJV - 3KRQH#VHWWLQJV - $ODUP# FORFN) (For details on how to work the Menu, see page 13) 2) Enter the alarm time, using two digits for both hours and minutes 3) Press 2. 4) Select either DP or SP and press 2. Note: Step 4 is necessary only if you have selected am/pm format; see “Selecting time format” on page 37 for more information.
Analog module See "Optional Analog Module" on page 84. Analog system selection See “Analog system selection” on page 85. Automatic answer This is one of the settings in your phone’s profiles (see page 65). With this on, your phone answers incoming voice calls after one ring. Note: (1) This is available only when your phone is connected to a headset or to an approved handsfree car kit equipped with the ignition sense option, with the ignition on.
Business cards Your phone can send or receive electronic business cards consisting of a name and phone number. You can save received business cards to your phone book. For details on the phone book, see "Phone book" on page 61. Sending business cards 1) Recall the name from your phone book 2) Press 'HWDLOV, if shown, or skip to Step 3 3) Press 2SWLRQV 4) Press W or V to reach 6HQG#EXV1#FDUG 5) Press 6HOHFW 6) Enter or recall the destination phone number 7) Press 2.
Deleting viewed business cards After viewing the business card, press %DFN, then press ([LW. Calculator Your phone’s calculator adds, subtracts, multiplies, divides, and converts between currencies. REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
2) Scroll to ([FKDQJH#UDWH, then press 2. 3) Scroll to +RZ#PDQ\#KRPH#XQLWV#WR#D YLVLWHG#XQLW (to enter the number of domestic units to a foreign unit) or +RZ#PDQ\#YLVLWHG#XQLWV#WR#D#KRPH#XQLW (to enter the number of foreign units to a domestic unit) 4) Press 2. 5) Enter the exchange rate (press # to enter a decimal point) 6) Press 2.
When your phone prompts you for the time with KK=PP, enter the time in hours and minutes (using two digits for each), then press 2. Press W or V to reach DP or SP, then press 2. You can set the time format to either 24-hour or am/pm using the Clock. See “Selecting time format” on page 37. When your phone prompts you for the date with PP2GG2\\\\, enter the month and day (using two digits for each) and year (using four digits), then press 2.. Tip: Use W to move the cursor right and V to move it left.
Press W or V to scroll through notes. Options while viewing a note are (UDVH, (GLW, 0RYH (to another date), and 6HQG#QRWH (to send the note). Option 2: Make note With this option, you’ll need to choose 5HPLQGHU, &DOO, 0HHWLQJ, or %LUWKGD\. Your phone will prompt you for more information depending on which one you choose. See “Entering letters and numbers” on page 42 for help with entering information at the 6XEMHFW= prompt. You can set an alarm for any of the note types.
Option 5: Go to date This option allows you to go directly to the specified date instead of scrolling. Enter a date in PPGG\\\\ format, then press 2. to go to that date. Option 6: Set the date This option allows you to set today’s date in your phone. Enter the date in PPGG\\\\ format, then press 2.. Calendar note received Your phone displays &DOHQGDU#QRWH#UHFHLYHG when someone sends you a note that you can save in your calendar.
Call cost limit This feature allows you to limit the amount of money you spend on your mobile phone bills. When the limit you set is reached, no calls can be made except for emergency calls. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing, and so forth. See also “Show call costs” on page 75. To choose whether you want call cost measured in charging units or dollars, see “Show costs in” on page 75.
Putting a call on hold While in a call, press +ROG. Press 8QKROG to return to the call. Making a call with one already in progress While in a call, enter (or recall from the phone book) the . second phone number and press ó OR 1) Press 2SWLRQV 2) Use W to reach 1HZ#FDOO#and press 6HOHFW. 3) Enter (or recall from the phone book) the second phone number, and press &DOO With either method, the first call is automatically put on hold. The currently active call is indicated by the the held call by the icon.
Using call log 1) Press 0HQX 2 (&DOO#ORJ) (For details on how to work the Menu, see page 13) 2) PressýW to reach one of the following options, then press 6HOHFW 2-1#0LVVHG#FDOOV - See page 56. 2-2#5HFHLYHG#FDOOV - See page 67. 2-3 'LDOHG#FDOOV#- See page 39. 2-4#&OHDU#FDOO#OLVWV - See page 36. 2-5 &DOO#WLPHUV#- See page 30. 2-6 6KRZ#FDOO#FRVWV - See page 75. 2-7 6KRZ#FRVW#LQ - See page 75. Tip: You can dial any of the phone numbers by pres- sing ó while the number is on the display.
Call timers The phone automatically tracks the amount of time you’ve spent in the last call and in all digital calls. If you have subscribed to a second phone line (see “Line in use” on page 53), call timers are separate for each of your phone lines. When you view call timers, the call timers that are shown are for the currently selected outgoing line. However, if you view call timers while you are in a call, the call timers that are shown are for the line you are using at that moment.
Call waiting This is a network service that allows you to receive an incoming call when you’re already in a call. The phone beeps to let you know of the incoming call. Contact your service provider for details. If you have subscribed to a second phone line (see page 53), call waiting settings affect both phone lines at the same time; for example, you cannot cancel call waiting on one line and not the other.
Caller groups You can create groups of names in your 3KRQH#ERRN (see page 61), and give each group a different ringing tone. Then you’ll know when someone from that group is calling you because of the way the phone rings. Adding names to a caller group Note: The names and numbers that you add to a group must already be stored in your Phone book. See “Saving names and numbers” on page 72.
Renaming a caller group 1) Follow steps 1-3 in “Defining a ringing tone for a caller group” 2) Press W until you see 5HQDPH#JURXS. Press 6HOHFW. 3) Enter the group name (see “Entering letters and numbers” on page 42 for details) and press 2. Group graphics Each caller group has a graphic (picture) associated with it. When you get a call from someone whom you have assigned to a caller group, the graphic associated with that group will flash on the screen.
If the caller can be identified, the caller's phone number (or name, if stored in the phone book) and the text FDOOLQJ appears while the phone is ringing. If the name is too long to be displayed, its end is replaced with an ellipsis (...). If the caller cannot be identified, only &DOO is displayed. If you subscribe to the Call Forwarding network service and the incoming call has been forwarded from another phone number, the ! sign is shown after FDOOLQJ.
8) Press W or V to reach &DUG#QDPH= and press 6HOHFW. Enter card name using your phone’s keypad, press 2.. (See “Entering letters and numbers” on page 42 if you need help on entering the card name.) For details about your phone’s security code, see “Security code” on page 72. Dialing Sequence Use for cards that require you to: Cards using this sequence Access no. + Phone no. + card no.
ó 2) Press and hold for a few seconds until your phone displays &DUG#FDOO 3) Your phone will display :DLW#IRU#WRQH/#WKHQ#SUHVV#2.. Wait for the tone, then press 2.. 4) Your phone will display :DLW#IRU#WRQH/#SUHVV#2.# DJDLQ. Wait for the tone, then press 2.. Note: Steps 3 and 4 may be switched depending on the dialing sequence you chose. This procedure may not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.
Clock Your phone has an internal clock that can be displayed on the start screen. It also features an alarm clock (see page 18). Setting the clock 1) Press 0HQX 4 3 3 (6HWWLQJV - 3KRQH#VHWWLQJV - &ORFN) (For details on how to work the Menu, see page 13) 2) Press W to $GMXVW#WLPH, press 6HOHFW 3) Enter the current time, using two digits for both hours and minutes 4) Press 2. 5) Select DP or SP and press 2.
Conference calls This is a network service that allows you to make conference calls with your phone. Check with your service provider for details. First, call the first person Make a call as usual. Then, call other participants Either of the following methods automatically puts the existing call on hold as you make the new call: 1) While in a call, enter the phone number of the person you want to conference in, and press ó OR Press 2SWLRQV, press Wýto 1HZ#FDOO, then press 6HOHFW.
Dropping individual participants from the conference call 1) While in a conference call, press 2SWLRQV 2) Press W to 3ULYDWH and press 6HOHFW. A list of the participants appears. 3) Scroll to the desired person and press 2.. The other participants can continue to talk to each other. 4) Press 2SWLRQV 5) Press W to 'URS FDOO and press 6HOHFW Currency conversion See “Currency conversion” on page 22. Current call duration See “Call timers” on page 30. Data calls See “Fax and data calls” on page 44.
Dice See "Games" on page 47. Digital/analog selection See “Digital/analog selection” on page 87. Distinct ringing This allows you to set the phone to ring in a special way when certain people call you. See “Caller grouping” on page 33. Earpiece volume The volume buttons on the side of your phone allow you to adjust the earpiece volume during a phone call. Pressing the top button increases the volume and pressing the bottom button decreases the volume.
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. If certain features are in use (Keyguard, fixed dialing, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call.
Entering letters and numbers You can enter letters as well as numbers when storing information into your phone. Simply press the corresponding number key repeatedly until the desired letter appears on the display (for example, use the 2 key to enter A, B, or C). ABC mode When your phone prompts you to enter letters, it will automatically switch over to ABC mode. Your phone displays the ABC icon to indicate that it is in ABC mode.
• switch between ABC mode and number mode by pressing and holding the # key. Special characters (for storing names) When you are in ABC mode (see page 42) you can press the key and the following special characters will appear. If your SIM card supports special characters, you can use these characters when storing names in your phone book. Simply press W or V to highlight the one you wish to use, then press ,QVHUW. .
Erasing stored names and numbers See “Erasing stored names and numbers” on page 63. Erasing your entire phone book See “Erasing your entire phone book” on page 63. Fax and data calls Your phone can send and receive data and faxes via an optional data adapter that connects to the base of the phone. The phone automatically recognizes the type of the connected terminal.
Turning fixed dialing on or off 1) Press#0HQX 4 2 5 (6HWWLQJV#0#6HFXULW\#VHWWLQJV#0#)L[HG# GLDOLQJ) (For details on how to work the menu, see page 13) Use W to reach 2Q or 2II then press 2. 2) Enter your PIN2 code and press 2. Note: If you turn fixed dialing on and don’t have any numbers in the list, you can’t make any calls! Note: When fixed dialing is set to on, calls may be possible to certain emergency numbers in some networks (e.g. 911 or other official emergency number).
Forwarding calls 1) Press#0HQX 5 ()RUZDUGLQJ) (For details on how to work the menu, see page 13) 2) UseýW to reach one of the following options, then press 6HOHFW: 5 1 )RUZDUG#DOO#YRLFH#FDOOV (Forwards all voice calls without ringing) 5 2#)RUZDUG#LI#EXV\ 5 3 )RUZDUG#LI#QRW#DQVZHUHG 5 4#)RUZDUG#ZKHQ#SKRQH#RII#RU#QR#FRYHUDJH 5 5#)RUZDUG#ZKHQ#QRW#DEOH#WR#WDNH#FDOOV (Combines the previous three types) 5 6 )RUZDUG#DOO#ID[#FDOOV 5 7 )RUZDUG#DOO#GDWD#FDOOV 3) $FWLYDWH is selected; press 2.
Games Challenge yourself or a friend to the five fun games in your phone. In the main menu scroll down to *DPHV, press 6HOHFW, and choose one of the following. REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. Memory Reveal pictures to find pairs in as few tries as possible. Move the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down) keys. Press the 5 key to reveal pictures.
When you start a new game, the dice roll for a couple of seconds and then stop. Use the 4 (left) and 6 (right) keys to select a die. Press the 5 key to lock or unlock the selected die. Press to roll the unlocked dice again. Rotation The object of the game is to arrange the numbers in order from one to nine. Rotate the numbers from within the frame in a clockwise direction using the 5 key. Use the 1 key to rotate the numbers in a counterclockwise direction.
Reading messages any time 1) Press 0HQX 1 1 1 (0HVVDJHV - 7H[W#PHVVDJHV - ,QER[) (For details on how to work the menu, see page 13.) A list of message headers appears. The icon in front of the header indicates that a message has been read. The icon indicates that a message has not yet been read.
'HWDLOV shows these details of the message, if available: sender’s name and phone number, SMS center used for sending, reception date and time, reply path availability. Delivery reports Delivery reports are special text messages that let you know the delivery status of a message that you have attempted to send. (See “Specifying settings for all messages” on page 56.) To read a delivery report, press 5HDG. Use the scroll keys to view different details about the message that you have attempted to send.
Deactivating Keyguard Press 8QORFN# Press and hold press 2. #OR ô until 8QORFN#NH\V" appears, then Answering a call with Keyguard active When Keyguard is active, you can only press answer a call. ó to Some notes about Keyguard • When Keyguard is ON, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). However, one-key emergency dialing (‘the 9 key’) does not operate. • Briefly pressing the seconds.
Language Because many wireless phone customers speak English as a second language, your phone allows you to choose your phone’s displayed language. Choosing a language for your phone 1) Press 0HQX 4 3 1 (6HWWLQJV - 3KRQH#VHWWLQJV /DQJXDJH) (For details on how to work the Menu, see page 13) 2) Use W or V to select the language you want and press 2. Note: A shortcut for choosing English is to press 0HQX 4 3 1 1. Last call duration See “Call timers” on page 30.
Line in use Alternate line service allows you to have more than one phone number. Contact your service provider for details. If you subscribe to this service, you can choose which phone number you want to make calls with. You can receive calls on either line regardless of the line selected for outgoing calls. Voice mail, call timers, and forwarding calls work separately on the second phone line. See the individual entries regarding these features for more information.
Listen to voice messages See “Voice messages” on page 80. Logic See "Games" on page 47. Memory See "Games" on page 47. Menu See “Working The Menu” on page 13. Message alert tone This is one of the settings in your phone’s profiles (see page 65). It sets the tone that your phone makes when you get a text message. Also, see “Text messages” on page 78.
To read the message, press 5HDG. This takes you to the Inbox, with the new message selected. Press 5HDG again to read the message. See “Inbox” on page 48 for more details on received text messages. Message settings Text messaging is a network service that allows you to send and receive text messages with your phone (see “Text messages” on page 78). Check with your service provider for details. You can specify some of the ways your phone handles text messages.
5HQDPH#WKLV#VHW: Enter a new name for this set of message settings and press 2.. Specifying settings for all messages 1) Press 0HQX 1 2 6 (0HVVDJHV - 0HVVDJH#VHWWLQJV &RPPRQ) (For details on how to work the menu, see page 13) 2) Press W to reach 'HOLYHU\#UHSRUWV or 5HSO\#YLD#VDPH# FHQWHU#and press 6HOHFW 'HOLYHU\#UHSRUWV: Press W to reach
When the display says 0LVVHG#FDOOV Press /LVW. If you have missed more than one call, you can scroll through the list of numbers. To dial the dis; for options, press 2SWLRQV played number, press (see “The ‘Options’ soft key” on page 29); to exit, press %DFN.
2) UseýW to reach one of the following options and press 2. 2Q - Turns on News & Info reception. 2II - Turns off News & Info reception. 7RSLF#LQGH[ - Gets a list of available topics from the network. 7RSLFV - Lets you work with the available topics. See “Working with Topics”. /DQJXDJH#- Chooses the language for messages. Scroll to the language(s) you want and press 0DUN for each one you want. Then press %DFN, then
One-touch dialing This feature allows you to make phone calls quickly and easily with the touch of a button. The second through eighth phone numbers you store to your phone book are automatically assigned to keys 2 through 8. You can change the key assignments using the following procedure. Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox and for attempting emergency calls (See “Voice messages” on page 80 and “Emergency Calls” on page 99).
2) Press W or V to select location you wish to change 3) Press 2SWLRQV 4) Press W or V to &KDQJH, then press 6HOHFW 5) Press W or V to select different name for location and press 2. Erasing one-touch dial locations 1) Repeat steps 1 through 3 in “Storing one-touch dial locations” 2) Press W or V to select location you wish to erase 3) Press 2SWLRQV 4) Press W or V to (UDVH, then press 6HOHFW 5) At the (UDVH" prompt, press 2. Outbox Text messages that you have written and saved are stored in the Outbox.
number keys to enter letters. (See “Entering Letters” on page 42 for details.) When you’re done, press 2SWLRQV again. You get the same options you get while writing a new message (6HQG, 6HQG#VSHFLDO, 6DYH, and &OHDU#VFUHHQ). See “Write messages” on page 82. *HW#QXPEHU displays the number that was included in the message (if available). You can treat it like any other number. )RUZDUG forwards the message to someone else. The steps are the same as sending a message.
About the submenus The phone book has several submenus from which you can choose. 6HDUFK allows you to search for a specific name. $GG#QHZ allows you to enter new names and numbers. (UDVH#DOO lets you erase every name and number in your phone book. You can erase one name and number at a time by pressing 'HWDLOV, then 2SWLRQV when viewing a name already in the directory. 2SWLRQV lets you choose your scrolling view (1DPH#OLVW, 1DPH.QXPEHU, or 1DPH#RQO\), as well as check how many more names your phone can sto
3) Edit the name, if desired, then press 2. 4) Edit the number, if desired, then press 2. Erasing stored names and numbers At the start screen, 1) Recall stored name 2) Press 2SWLRQV 3) Highlight (UDVH, then press 6HOHFW, then 2. Note: You cannot undo Erase functions so be careful! Erasing your entire phone book 1) Press 1DPHV 2) Press W to highlight (UDVH#DOO 3) Press 6HOHFW 4) Press 2. at $UH#\RX#VXUH" 5) Enter security code at 6HFXULW\#FRGH= 6) Press 2.
Setting phone security 1) Press 0HQX 4 2 (6HWWLQJV#0#6HFXULW\#VHWWLQJV) 2) Press W to reach 3KRQH#VHFXULW\ then press 6HOHFW 3) Enter your security code and press 2. 4) UseýW to reach 2II or 2Q, and press 2. 2II means that the security code is not required when the phone is switched on. 2Q#means that the when you switch on the phone and you’re using a new SIM card, the phone will require you to enter the security code.
If you enter a wrong PIN code three times in succession, enter the PUK code (see “PUK and PUK2 codes” on page 66) and press 2.. Enter a new PIN code and press 2.. Re-enter the new code and press 2.. The PIN2 code is a 4- to 8-digit number and is supplied with some SIM cards. It is required to access some functions. These functions must be supported by your SIM card. If you enter a wrong PIN2 code three times in succession, follow the same instructions as for the PIN code but this time using the PUK2 code.
Customizing profiles 1) Press 0HQX 3 (3URILOHV) (For details on how to work the Menu, see page 13) 2) Press W or V to reach the desired profile 3) Press 2SWLRQV to see the following choices: 6HOHFW activates the currently selected profile. &XVWRPL]H allows you to customize a profile by changing the current settings. (If you choose &XV0 WRPL]H, you’ll have access to several lists and submenus that will enable you to adjust the settings on the current profile.
If you enter a wrong PUK code ten times in succession, the SIM card becomes invalid. Contact your service provider for a new card. The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you enter a wrong code ten times in succession, you can’t use the functions requiring the PIN2 code. Contact your service provider for a new card. You can’t change the PUK or PUK2 code. If you lose it, contact your service provider. Read messages See “Inbox” on page 48.
Restrict calls This is a network service that lets you restrict the calls your phone can make and receive. Check with your service provider for details. Note: When calls are restricted, calls may be possible to certain emergency numbers in some networks (e.g. 911 or other official emergency number). Restricting calls 1) Press 0HQX 4 2 4 (6HWWLQJV - 6HFXULW\#VHWWLQJV 5HVWULFW#FDOOV) 2) UseýW to scroll through the types of calls you can restrict, and press 6HOHFW when you see the one you want: 2XWJRLQJ#FDOOV
For more information about your system password, see “System password” on page 77. Ringing options This is one of the settings in your phone’s profiles (see page 65). You can choose how your phone notifies you of an incoming call. This setting does not affect incoming text message alert tones (see page 78).
Note: The call alert setting is stored individually for operation with a handsfree headset and a handsfree car kit. Ringing tone received Your phone can receive ringing tones that can be saved as the 3HUVRQDO entry in your list of ringing tones. Contact your service provider for details about sending ringing tones to your phone. When your phone receives a ringing tone, it displays 5LQJLQJ#WRQH#UHFHLYHG.
As outlined in the table below, the sound your phone makes when you receive a call depends on the ringing option for the currently selected profile, whether the caller is assigned to a caller group, and, if the &DOOHU# JURXSV ringing option is selected, which caller group the caller belongs to.
2) UseýW to highlight the profile you want to set the ringing volume for, and press 2SWLRQV 3) Highlight &XVWRPL]H and press 2.. Press W to 5LQJLQJ#YROXPH, then press 6HOHFW. 4) Press W to scroll through the options. When you hear the volume level you wish to use, press 2.. Saving names and numbers You can save names and numbers in the Phone book. Either use the method described in “Phone book” under the option $GG#QHZ (see “About the submenus” on page 62), or the “quick save” methods described below.
This code comes with your phone. The default security code is 12345. For information on how to change the security code, see “Access codes” on page 18. Keep the code secret and in a safe place, separate from the phone. Security settings Menu 4 2 in your phone lets you choose settings for the following items (each entry is described separately in this guide): 6,0#FDUG#VHFXULW\ 3KRQH#VHFXULW\ 0RGXOH#VHFXULW\ (appears only if optional analog module • • • attached) 5HVWULFW#FDOOV )L[HG#GLDOLQJ • &DOO#FRVW#OL
Send own number This is a network service that specifies whether or not you wish to display your phone number to the person you are calling. Contact your service provider for details. Note: This feature is only effective when calling to a number that is equipped with Caller ID.
• &DOO#VHWWLQJV • 6HFXULW\#VHWWLQJV • 3KRQH#VHWWLQJV • $QDORJ#PRGXOH#VHWWLQJV (appears only when optional analog module attached) Show call costs This network service allows you to check the cost of the last or current call, or the total cost of all calls that you have made or received since the counters were last reset. Contact your service provider for details. To choose whether call costs are shown in charging units or in dollars, see “Show costs in”.
1) Press 0HQX 2 7 (&DOO#ORJ - 6KRZ#FRVWV#LQ) 2) Press W or V to reach &XUUHQF\ or 8QLWV, then press 6HOHFW 3) If you selected &XUUHQF\, enter the price of each charging unit (contact your network operator for this information) and press 2.. If you chose 8QLWV, call costs and call cost limits will be measured in charging units. SIM card security You can set the phone to require you to enter the PIN code every time you switch on the phone. Note that some SIM cards do not allow this feature to be turned off.
Snake See "Games" on page 47. Start screen See “What is the ‘start screen’?” on page 14. System password This is a password you get from your service provider. You need it to activate Call Restrictions. (See “Restrict calls” on page 68.) Contact your service provider for details. System selection This menu specifies how the phone should choose a PCS system (network), as there may be more than one available. The selection you make stays active until you change it or change the SIM card.
Text messages The text message network service allows you to send short text messages to other phones that have text message capability. You can also ask the service provider to convert the message to other formats such as email and fax. The messages are first sent to your Message Center, then delivered to the recipient. To send and receive text messages, the phone needs your message center number. See “Message settings” on page 55.
Storing touch tone strings Touch tone strings can be used for sending and receiving information with your phone. For example, you can store your office voice mailbox number along with your password for easy access to your messages. Store touch tone strings the same way you store phone numbers (see page 62). You can store a whole digit sequence in your phone book and send it as touch tones for frequently used strings of numbers.
Transfer a call If your network and SIM card support this feature, when you have one active and one held call, you can connect the two calls and disconnect yourself from the call. During a call, press 2SWLRQV, scroll to 7UDQVIHU, and press 6HOHFW. Vibrating alert This is one of the settings in your phone’s profiles (see page 65). If your phone has the BMS-2V vibrating battery attached, you can set your phone to vibrate when you receive a voice call.
Your phone will display the number of voice messages if you’ve received more than one. If you have subscribed to a second phone line (see “Line in use” on page 53), the phone tells you which line the message was intended for. Setting up your voice mailbox Before you can retrieve any voice messages, you need to store your voice mailbox number. Your service provider usually gives this number to you.
To listen to messages anytime, press and hold the 1 key. Or if you prefer, you can access your voice mailbox by pressing 0HQX 1 3 1 (0HVVDJHV#0#9RLFH#PHVVDJHV#0# /LVWHQ#WR#YRLFH#PHVVDJHV). Volume See the separate entries for Earpiece volume, Keypad tones, and Ringing volume. Warning and game tones This is one of the settings in your phone’s profiles (see page 65). Warning tones include tones your phone makes for conditions such as errors, confirmations, power on, battery low, and recharge battery.
Writing a message 1) Press 0HQX 1 1 3 (0HVVDJHV - 7H[W#PHVVDJHV - :ULWH# PHVVDJHV) (For details on how to work the Menu, see page 13) 2) Enter a message of up to 160 characters. The number of available characters is shown in the top right corner of the display. For details on entering letters, see “Entering letters” on page 42. Note: You can exit the message any time (by pressing ) and return to it later by pressing Menu 1 1 3 (0HVVDJHV - 7H[W#PHVVDJHV - :ULWH# PHVVDJHV).
6. Optional Analog Module With an optional Nokia PLUS analog module and a dual-mode SIM card, you can use your phone in analog networks. See your dealer for details on how to purchase this accessory and activate your subscription. Attaching the analog module First remove the battery. See “Removing the battery” on page 9.
Analog features In order for you to use the analog module, your service provider will have to add certain information to your SIM card. See your service provider for details. Once you have installed the upgraded SIM card and attached the analog module, your phone gives you access to analog network features. Note that some features described in this manual will not be available due to the difference between digital and analog networks.
3UHI1#V\VWHP If service is not available in your home system, the phone searches for a preferred system (either home type or non-home type), then a hometype system, then a non-home-type system. +RPH#W\SH If service is not available in your home system, the phone searches for a preferred system (home type only), then a home-type system. 1RQKRPH#W\SH The phone searches for a preferred system (non-home-type only), then a non-hometype system. +RPH#RQO\ The phone uses its home system only (that is, it will not r
3) Enter the module code, then press 2. again To show the current call timer during calls See “Showing the current call timer during calls” on page 30. Change module code Your analog module has a module code that is used in the “Module security” feature described on page 88. The module code is initially set to 12345. To change the module code: 1) Press#0HQX 4 2 7 5 (6HWWLQJV - 6HFXULW\#VHWWLQJV $FFHVV#FRGHV - &KDQJH#PRGXOH#FRGH) (For details on how to work the Menu, see page 13) 2) The phone prompts you fo
Module security If you purchased an optional analog module, you can protect it from unauthorized use by turning on module security. When module security is on, the phone requests the module code when you turn the phone on if (a) you have not changed the module code from the default of 12345, or (b) you have changed it and it differs from the security code. (See “Change module code” on page 87 for information about changing the module code.
7. Call Forwarding Codes The codes described in this section give you greater control over call forwarding features in GSM 1900 networks than do the menu items in your phone. Enter these codes using the keypad on your phone. In place of the letter N in the codes below, substitute the number to which you want to forward calls. After entering the code, press ó. Unless stated otherwise, forwarding affects voice calls only. Note: These codes might not work identically in all networks.
Adding a call type You can specify whether you want call forwarding to apply only to certain types of calls by adding an asterisk (*) and two-digit code before the # in the forwarding codes listed in the previous table. Call type Code All call types 10 Voice calls only 11 Data calls only 20 Fax calls only 13 Text messages only 16 All call types except text messages 19 Example: You want to forward fax calls only to 972-555-1111 when your line is busy. > Enter --9:-<:58884444-46& then press ó.
8. Accessories An extensive range of accessories is available for your phone. You can select the accessories that best suit your specific communication needs. For availability, please check with your local dealer. A few practical rules for accessory operation: • Keep the accessories out of small children's reach. • When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
Charging Times The table below displays approximate battery charging times. These charging times will charge your phone to about 80% of its capacity, and the battery strength indicator will stop scrolling. If you wish to obtain 100% battery capacity, please allow another two hours for “maintenance” charge.
Chargers and other accessories WARNING! This apparatus is intended for use when supplied with power from the Standard Travel Charger (ACP-7U), Rapid Travel Charger (ACP-9U), or Rapid Cigarette Lighter Charger (LCH-9). Other usage will invalidate any approval given to this apparatus and may be dangerous. The following chargers and other accessories are available for your phone; please see your dealer for details.
ACP-9U Rapid Travel Charger The extremely light, functionally designed Rapid Travel Charger charges your phone battery quickly. (See “Charging Times” on page 92.) Plug the charger into a wall outlet and connect the connector to the bottom of your phone. Check the charging status on the phone display. You can use your phone while charging. Operating within a voltage range of 100V-240V AC (50Hz-60Hz), the Rapid Travel Charger is practically voltage-independent in normal office and household use.
Avoid prolonged charging with the Rapid Cigarette Lighter Charger when the car engine is not running. This may cause the battery of your car to drain. Note: In some cars the cigarette lighter plug is not provided with power when the ignition is switched off. Verify that the green LED light is lit. DCH-9 Compact Desktop Charging Stand Compatible with all battery options, the Compact Desktop Charging Stand can be used with the Standard Travel Charger ACP-7U or the Rapid Travel Charger ACP-9U.
When the spare battery is charging, check the status indicator on the left side of the charging stand. A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity. DCH-9 Rear Slot Charging Times Using ACP-7U Battery option BPS-1 Ultra Slim Li-Polymer 600 mAh Using ACP-9U Front slot empty Front slot full Front slot empty Front slot full 4hrs. 30 min. 6 hrs. 30 min. 3 hrs. 4 hrs. 30 min. 6 hrs. 30 min. 8 hrs. 30 min.
9. Reference Information Important Safety Information Traffic Safety Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Persons with pacemakers: • Should always keep the phone more than 6 inches (20 cm) from their pacemaker when the phone is switched on; • Should not carry the phone in a breast pocket; • Should use the ear opposite the pacemaker to minimize the potential for interference. • If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids.
Users are advised to switch off the phone while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. Making an Emergency Call 1) If the phone is not on, switch it on. Some networks may require that a valid SIM card is properly inserted in the phone. ô 2) Press the key to ready the phone for calls.
• • • • • • • discharge facility of any approved accessory available for your phone). Do not attempt to discharge the battery by any other means. Temperature extremes will affect the ability of your battery to charge: allow it to cool down or warm up first. Use the battery only for its intended purpose. Never use any charger or battery which is damaged or worn out. Do not short circuit the battery.
*American National Standards Institute, National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection. Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years.
10. Technical Information Weight: 4.8 oz. with BLS-2N battery Transmitting power: 1 W nominal Operating voltage: 3.6V dc 12V dc for car kit Frequency band: 1850.2 to 1909.8 MHz (TX) 1930.2 to 1989.8 MHz (RX) Number of channels: 512 to 810 Memory locations: Up to 250. Actual number is dependent on SIM card capacity. Please check with your SIM card provider or carrier. Memory capacity: Depends on SIM card. Please check with your SIM card provider or carrier.
NOKIA One-Year Limited Warranty Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. 2.
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by NMP.
f) If the Product is returned to NMP during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect.
12. NMP neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement. 13.
Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA2U (1-888-665-4228), fax 813-249-9619.
109
110
