Cell Phone User's Guide

56
If you wish to do neither and want to return to the start
screen, press and hold .
Note: This feature may not be available in all systems.
Please contact your service provider for details
about the availability of this feature.
Network feature setting
Call forwarding
(page 24),
Call waiting
(page 27) and
Send own caller ID with next call
(page 71) are network
services available through your service provider or dealer.
When you subscribe to any of these services, your service
provider or dealer gives you a separate feature code to
activate each service. Deactivation codes are used to
deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Note: These feature codes may already be stored in your
phone by your service provider. Check with your
service provider to confirm if these codes are
already configured in your phone.
Note: If your phone has more than one phone number
programmed, any feature codes stored will apply
only to your primary phone number, or NAM 1.
Storing feature codes
1.
Press
Menu
4-4-5 (
Settings
-
Network services
-
Network feature setting
).
2.
At
Feature code:
, enter the feature code or deacti-
vation code received from your dealer (for example,
∗
74 or
∗
740), press
OK
.
3.
Scroll to the service that the code applies to and
press
Select
.
4.
Scroll to suboption, then
Select
(Repeat step as
required, based on number of suboptions).
(Use step four only for call forwarding options.)
5.
Scroll to
Activate
or
Cancel
, then press
OK
.