Cell Phone User Manual

60
4. Scroll to Erase and press OK
5. Scroll to the restriction you wish to erase, press OK
6. Press OK again to erase restriction
Note: The All calls option cannot be erased and therefore does not
appear in the list of restrictions to be deleted.
Ringing options
This is one of the settings in your phone’s profiles (see
page55). It allows you to choose whether or not your
phone rings, beeps, or remains silent when someone calls
you. This feature does not affect incoming text message
alert tones (see page67).
Selecting ringing options
1. Press Menu 3 (Profiles)
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
3. Highlight Customize and press OK. Press t to
Ringing options, then press Select.
4. Highlight either Ring, Ascending, Ring once, Beep
once or Silent and press OK
Note: The Ascending ringing option plays the selected ringing tone
at a low volume, then gradually increases in intensity with each
ring.
Ringing tone
This is one of the settings in your phone’s profiles (see
page55). It allows you to choose one of the many ringing
tones your phone uses for incoming voice calls.
If you set Ringing Options (see page59) to Silent or Beep
once, ringing tones are automatically disabled; however,
incoming calls can still be received.
Selecting ringing tones
1. Press Menu 3 (Profiles)
61
2. Your phone lists each profile. Use t to highlight the
profile you want and press Options.
3. Highlight Customize and press OK. Press t to
Ringing tone, then press Select.
4. Press t to scroll through the options. After you hear
the tone you wish to use, press OK.
Ringing volume
This feature, which is found within your phone’s profile
settings, allows you to adjust your phone’s ringing
volume.
See “Volume” on page74 for details.
Saved
This is where saved text messages are stored.
See “Text messages & paging” on page67 for details.
Scrolling view
You have three different options on how you can view the
phone book. Your choices are:
Name list shows all stored names in a scrolling list. Three
names will appear at any given time. To view other names
in the directory, scroll back and forth through the list
using t or s. Name list is the default setting.
Name+number displays individual names and numbers
stored in your directory. Only one name will display on
your screen at a time, with the corresponding phone
number. Use t or s to view other names.
Name only shows individual names only on a full screen
display. To view other names, use t or s. You can view
the corresponding phone number by pressing Details,
then t or s.
Selecting your scrolling view
1. Press Names