Cell Phone User Manual

48
Storing feature codes
1. Press Menu 4-4-4 (Settings - Network services -
Network feature setting)
2. At Feature code:, enter the feature code or deacti-
vation code received from your dealer (e.g. ∗74,
∗740, etc.), press OK
3. t to the service that the code applies to and press
Select
4. t to suboption, then Select (Repeat step as
required, based on number of suboptions)
(Use step four only for call forwarding options)
5. t to Activate or Cancel, then press OK
Network services
Some of the features in this menu are network services
that require a subscription. See your service provider for
details and availability.
4-4-1 Call forwarding * - See page22.
4-4-2 Call waiting * - See page26.
4-4-3 Send own caller ID with next call * -
See page63.
4-4-4 Network feature setting - See page47.
4-4-5 NAM selection - See page46.
4-4-6 NAM update - See page46.
* These features will not appear in the menu unless they are acti-
vated using Network feature setting. See “Network feature
setting” on page47 for details.
One-touch dialing
This feature allows you to make phone calls quickly and
easily with the touch of a button.
You must store names and numbers in your phone book
(see page52) before you can use this feature. Then you
can assign a name from the phone book to a one-touch
49
dial location using your phone’s keys 2 through 8.
Note: Keys 1 and 9 are used exclusively for dialing your voice mailbox
(see page73) and for attempting emergency calls (see page88) to the
emergency number programmed into your phone (e.g. 911 or other offi-
cial emergency number). Press and hold either of these keys to initiate
the appropriate call.
Assigning one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press Select
2. Scroll to next available empty location, (empty) will
appear, then press Assign
3. Scroll to select desired name and press Select
4. Repeat as necessary
Calling a number using one-touch dialing
Press and hold the key (2 through 8) for a few seconds to call
the number in the corresponding one-touch dial location. You
can also press the key and then if you prefer.
Your phone recalls the phone number from the memory,
displays it briefly, then dials it.
Changing numbers in one-touch dial list
With this feature, you can assign a different number to any
one-touch dial location.
1. Press Names, scroll to 1-touch dialing and press Select
2. Scroll to the location you wish to change and press
Options
3. Scroll to Change, then press Select
4. Scroll through phone book to select new number and
press Select
Erasing one-touch dial locations
1. Press Names, scroll to 1-touch dialing and press Select
2. Scroll to the location you wish to erase and press
Options