Cell Phone User Manual

28
*These calling cards are frequently used with these dialing sequences.
However, they may vary and are subject to change at the phone
company’s discretion.
Note: The order of the steps to follow may vary, depending on which
dialing sequence your card uses.
6. Enter access number when prompted for the calling
card’s access number (usually the 1-800 number listed
on the back of the calling card), press OK
Note: You can also retrieve the access number from your phone book if
it has already been stored. Simply press Search, then t or s to find the
number.
7. Enter card number and/or PIN when prompted to enter
calling card number and personal identification number,
then press OK. Press OK again at Save changes?
8. Press t or s to display Card name and press Select.
Enter card name using your phone’s keypad, then press
OK.
See “Entering text and numbers” on page35 if you need help on entering
the card name
Choosing a calling card to use
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card)
2. Press t or s to desired card, press Options
If you use a
calling card from:*
You typically are required to:
Select this
dialing
sequence:
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Dial 1-800 access number, then
phone number, then card num-
ber (+ PIN if required)
Access no.
+ phone no.
+ card no.
networkMCI,
WorldPhone MCI
Dial 1-800 access number, then
card number (+ PIN if required),
then phone number
Access no.
+ card no.
+ phone no.
GTE, PacBell, AT&T,
Stentor
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
Prefix
+ phone no.
+ card no.
29
3. Press t or s to highlight Select and press OK
4. Enter security code at Security code:, press OK
5. Your phone will display Card ready for use
Making calling card calls
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make a
calling card call. See your calling card for instructions.
Press and hold for a few seconds until your phone
displays Card call.
When you see Wait for tone, then press OK, listen for
the tone, then press OK. When you see Wait for tone,
press OK again, listen for the tone, then press OK.
Note: This procedure may not apply to all calling card options pro-
grammed into your phone. Please look at the back of your calling
card or contact your long distance company for more information.
Change lock code
This feature allows you to change your lock code.
See “Changing your lock code” on page43.
Change security code
This feature allows you to change your security code.
See “Changing your security code” on page62.
Clear call lists
This feature will clear all dialed numbers, as well as
numbers of answered calls and missed calls. You can not
undo this operation, so be careful.
Also, see “Call log” on page24.
1. Press Menu 2-4 (Call log - Clear call lists)
2. Highlight either All, Missed, Received, or Dialed
and press OK (All will clear all call lists, while the
others clear their respective call lists)