Cell Phone User Manual

26
Call waiting
If you have subscribed to call waiting, your phone will
beep during a call to let you know you have an incoming
call. Your phone may also display the incoming caller’s
identification
See “Call forwarding” on page22 for details on caller ID.
Answering an incoming call with call waiting
Press
Swapping between two calls
Press
Ending the calls
Press to end both calls
Activating call waiting
You can also activate this feature with your phone;
simply ask your service provider for the feature code,
store it into your phone, then activate it.
Note: This feature may not appear in your phone’s menu or
function properly until the feature code has been stored.
See “Network feature setting” on page47 for more details.
1. Press Menu 4-4-2 (Settings - Network services -
Call waiting)
2. Press t to Activate (or select Cancel to cancel)
3. Press OK
4. Your phone will attempt to call the network to
confirm the feature code you entered in Menu 4-4-4
(see “Network feature setting” on page47)
5. Once the feature code has been confirmed, the
feature is activated.
Caller ID
This is a network service that helps identify incoming
calls. Contact your service provider for details.
27
When Caller ID is active, your phone may display the
caller’s phone number. The caller’s name may also display
if their name and number has been stored in the phone
book or if the wireless network supports it.
Call or Call-caller ID unavailable will display when the
wireless network doesn’t recognize the calling number.
Also, Call-caller ID blocked may display if the calling
party has blocked caller ID.
Note: If you have stored a number more than once in your phone
book, and that number is stored each time with a different name,
then a name will not appear when someone calls from that
number.
See “Personal Tone” on page50 for details on your phone book.
Calling card
If you wish to use a calling card for
long distance calls, you must first
store your calling card information
into your phone. Your phone can
store up to four calling cards.
Storing a calling card
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card)
2. Press t or s to desired calling card, press Options
3. Press t or s to Edit, press OK
4. Enter security code and press OK
See “Security code” on page62 for details on your phone’s security
code.
5. Press Select at the Dialing sequence prompt. Use
the following chart to determine the dialing
sequence required by your long distance provider.
Then press t or s to select the appropriate
sequence for your card.
Press Select to confirm your choice.