Cell Phone User Guide

Media
52
3. If you have already saved radio channels, select or to scroll to the
channel you would like to listen to.
To select a radio channel location, briefly press the corresponding number keys.
4. To turn off the radio, select Options > Turn off. A long press on of the end key
also turns the radio off.
Options
With the radio on, select Options and one of the following:
Turn off—Turn off the radio.
Save channel—Save the current station to one of 20 locations (only available
with a new station entered).
Channels—Scroll up or down to select a channel from 20 locations. WIth an
existing channel highlighted, select Options > Delete channel or Rename to
delete or rename the saved channel.
Mono output or Stereo output—Listen to the radio in monaural mode (default) or
in stereo. Stereo output is available through a stereo enhancement.
Loudspeaker or Headset—Listen to the radio through the speakerphone or
through the headset.
Set frequency—Manually enter the frequency of a known radio station.
To set the radio frequency, press * and use the keypad to enter the frequency of a
known radio station.
To adjust the radio volume, press the volume up and down keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. When the call
ends, the radio switches back on.
Tune and save a radio channel
You can save a preset station to any one of 20 locations in memory.
1. When the radio is on, select or to change the radio frequency in
0.1 MHz steps, or select and hold or to start the channel search.
Searching stops when a channel is found.
2. To save the channel, select Options > Save channel.
To save the channel to a memory location 1 to 9, press and hold the
corresponding number key while the radio is playing. To save the channel
in the memory location from 10 to 20, press briefly 1 or 2 and the desired
number key 0 to 9.