PAMS Technical Documentation CARK–64 Installation Guide Original 11/97
PAMS CARK–64 Technical Documentation Introduction This installation guide has been prepared to provide the basic information necessary to install this car kit. This guide is not intended to be definitive, because different types and models of vehicles will require different installation work. The information given is for general guidance only. The terms of warranty demand that this car kit be installed by an experienced installer and only genuine Nokia parts are used.
PAMS CARK–64 Technical Documentation Unpacking Carefully unpack the equipment and ensure that the following items are present.
PAMS CARK–64 Technical Documentation Component Parts Phone Holder MBC–1 The holder allows the phone to be firmly located in a convenient position. The holder is attached to the vehicle’s interior using the swivel mount HHS–9, or the mounting plate MKU–1. The mounting must be secured with a screw (included with HHS–9). The screw recess can then be covered with the NOKIA logo plate.
