PAMS Technical Documentation NSM–1 Series Transceivers Disassembly & Troubleshooting Instructions Original 10/98
NSM–1 Disassembly & Troubleshooting Instructions PAMS Technical Documentation CONTENTS Page No Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NSM–1 PAMS Technical Documentation Disassembly & Troubleshooting Instructions Disassembly Remove battery Remove dust cap by finger nail Remove back cover screws (4 pcs). NOTE! When assembling the B cover screws, use 17 Ncm torque. Carefully remove A–cover. Keymat, powerkeymat and speaker will follow. Note snap fixings ! Turn around.
NSM–1 PAMS Disassembly & Troubleshooting Instructions Technical Documentation Remove UI–module and frame. NOTE the snap fittings holding the frame and B–cover together. When assembling the phone be sure to assemble the snaps properly. Remove engine module Remove antenna by pulling it straight out.
NSM–1 PAMS Technical Documentation Disassembly & Troubleshooting Instructions Trouble Shooting Introduction Contents of troubleshooting is to be added.
NSM–1 PAMS Disassembly & Troubleshooting Instructions Technical Documentation This page intentionally left blank.