Nokia 6111 User Guide EN 9241565 Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this product RM-82 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
Contents For your safety ..................................................................................................... 9 General information.......................................................................................... 13 Overview of functions ............................................................................................................................. 13 Access codes ..........................................................................................................
4. Write text....................................................................................................... 33 Settings ....................................................................................................................................................... 33 Predictive text input................................................................................................................................ 33 Traditional text input ....................................................
My presence............................................................................................................................................... 61 Subscribed names..................................................................................................................................... 62 Settings ....................................................................................................................................................... 64 Groups...............................
12.Media............................................................................................................ 90 Camera......................................................................................................................................................... 90 Media player .............................................................................................................................................. 93 Music player..........................................................
16.Web............................................................................................................. 119 Set up browsing ..................................................................................................................................... Connect to a service ............................................................................................................................. Browse pages...................................................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.
■ About your device The wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
content and application download, and synchronization with a remote Internet server, require network support for these technologies. ■ Shared memory The phone has two memories. The following features may share the first memory: contacts, text messages, multimedia messages (but no attachments), instant messaging, groups, voice tags, calendar, and to-do notes. The second shared memory is used by files stored in Gallery, attachments of multimedia messages, e-mail, and JavaTM applications.
General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE). See Packet data p. 78 • Extensible hypertext markup language (XHTML). See Web p. 119 • Audio messaging. See Nokia Xpress audio messaging p. 42 • Instant messaging. See Instant messaging (IM) p. 46 • E-mail application.
■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see Security p. 86. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See Security p. 86.
Barring password The barring password (4 digits) is required when using the Call barring service. See Security p. 86. ■ Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Push to talk, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone.
■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software.
1. Get started ■ Open the slide phone To open the slide of the phone, push the upper part of the phone up. ■ Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with BL-4B battery.
Install SIM card 1. Make sure that the cover of the connector panel is closed. 2. Slide the phone open. 3. Open the SIM card compartment (1) on the back of the slide 4. Slide the metal SIM card holder towards the compartment lid to release it (2). 5. Open the SIM card holder. 6. Insert the SIM card in the holder as shown (cut corner at the upper right). Copyright © 2006 Nokia. All rights reserved.
7. Close the SIM card holder, and press it down slightly. 8. To lock the SIM card holder, slide it away from the compartment lid (1). 9. Close the SIM card compartment (2). Install battery Important: Always use original Nokia batteries. See Nokia battery authentication guidelines p. 133. 1. Open the cover of the connector panel (1). 2. Press the red release button above the connector panel (2), and take off the back cover of the phone (3). Copyright © 2006 Nokia. All rights reserved.
3. Observe the battery contacts, and place the battery in the battery compartment. 4. Place the back cover in the double catch of the phone (1) and press it down slightly (2) to close the back cover. ■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. This device is intended for use when supplied with power from an AC-4 charger.
The charging time depends on the charger and the battery used. For example, charging a BL-4B battery with the AC-4 charger takes approximately 1 hour and 10 minutes while the phone is in the standby mode. ■ Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press the power key. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.
■ Antenna Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
2. Your phone ■ Keys and parts 1 Left selection key 2 Call key 3 Middle selection key 4 4-way navigation key 5 Right selection key 6 End key 7 Keypad Copyright © 2006 Nokia. All rights reserved.
8 Volume up and PTT key and zoom in key 9 Volume down key and zoom out key 10 Camera release key 11 Camera flash 12 Camera lens 13 Mirror for self-portraits 14 Infrared (IR) port 15 Power key 16 Pop-PortTM connector 17 Back cover release button 18 Charger connector Copyright © 2006 Nokia. All rights reserved.
■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. Display 1 Signal strength of the cellular network 2 Battery charge status 3 Indicators 4 Name of the network or the operator logo 5 Clock 6 Display area 7 Left selection key: Go to or another function that you selected 8 Middle selection key is Menu 9 Right selection key: Names, or another function that you selected To set the left and right selection key function, see My shortcuts p.
calendar and notes. Scroll up or down to activate the navigation in the list. Select Select to start a feature or View to display information. Left and right arrows at the beginning and end of a line indicate that further information is available by scrolling left or right. To end the active standby navigation mode, press Exit. To switch off the active standby mode select Options > Active standby > Off or Menu > Settings > Display > Standby mode settings >Active standby > Off.
Shortcuts in the standby mode • To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; to call the number, press the call key. • To open the web browser, press and hold 0. • To call your voice mailbox, press and hold 1. • Use the navigation key as a shortcut. See My shortcuts p. 73. Power saving The power saving mode is activated, when no function of the phone has been used for a certain period of time.
Indicators You received one or several text or picture messages. See Read and reply to a SMS message p. 37. You received one or several multimedia messages. See Read a MMS and reply p. 40. The phone registered a missed call. See Log p. 68. The keypad is locked. See Keypad lock (keyguard) p. 29. The phone does not ring for an incoming call or text message when Incoming call alert and Message alert tone are set to Off. See Tones p. 71. The alarm clock is set to On. See Alarm clock p. 110.
Bluetooth connection indicator. See Bluetooth wireless technology, p. 75. Push to talk connection is active or suspended. See Push to talk p. 101. ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad. In the standby mode close the slide of the phone, and select Lock to lock the keys. To unlock the keypad, slide the phone open, or select Unlock, and press * or OK, if slide is closed.
3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code); then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key.
Speed dialing Assign a phone number to one of the speed-dialing keys, 2 to 9. See Speed dials p. 66. Call the number in either of the following ways: • Press the speed-dialing key, then press the call key. • If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in Call p. 82. ■ Answer or reject a call To answer an incoming call, press the call key. To end the call, press the end key, or close the slide. See Slide call handling in Call p. 82.
Call waiting To answer the waiting call (network service) during an active call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate Call waiting, see Call p. 82. ■ Options during a call Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Many of the options that you can use during a call are network services. For availability, contact your service provider.
4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top of the display. , , or appear next to the text input indicator, indicating the character case.
1. To start writing a word, use the 2 to 9 keys. Press each key only once for a single letter. The word changes after each keypress. 2. When you have finished writing the word and it is correct, to confirm it, press 0 to add a space, or press any of the navigation keys. Scroll to move the cursor. If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, confirm it. If ? is displayed after the word, the word you intend to write is not in the dictionary.
5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu, and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer). 5.
6. Messaging The message services can only be used if they are supported by your network or your service provider. Note: When the phone is sending the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. At the top of the display, you can see the message length indicator counting backwards from the maximum number of characters supported by the phone. Write and send a SMS message Use the navigation key to jump from one input field or button to the next. 1.
To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select the message that you want to read. indicates an unread message. While reading a message, select Options to delete or forward the message; edit the message as a text message or an SMS e-mail, or move it to another folder; or view or extract message details. You can also copy text from the beginning of the message to your phone calendar as a reminder note.
To set the settings for multimedia messaging, see Multimedia p. 55. To check availability and to subscribe to the multimedia messaging service, contact your service provider. You cannot receive multimedia messages during a call, a game, another Java application, or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications. Write and send a MMS 1.
3. To send the message, select Send. Enter the recipients phone number in the input field To:, or select Add to select the phone number from various lists. Optionally enter a text in the input field Subject:. Select the field Presentation: and Edit to add or remove multimedia objects. Select Send to move the message to the Outbox folder for sending. While the multimedia message is being sent, the animated indicator is displayed and you can use other functions on the phone.
2. The function of the middle selection key changes according to the currently displayed attachment in the message: To view the whole message if the received message contains a presentation, a sound clip, or view a video clip, select Play. To view a business card or calendar note or to open a theme object, select Open. 3. To reply to the message, select Options > Reply > Text message, Multimedia, or Audio message. Enter the reply message, and select Send.
■ Nokia Xpress audio messaging With this menu, use the multimedia message service to create and send a voice message in a convenient way. Multimedia messaging service must be activated before this service can be used. Create and send an audio message 1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see Recorder p. 99. 2.
■ Memory full When you are receiving a message and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. ■ Folders The phone saves received text and multimedia messages in the Inbox folder.
■ E-mail application The e-mail application (network service) allows you to access your compatible email account from your phone when you are not in the office or at home. This email application is different from the SMS and MMS e-mail function. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mail, you may need to do the following: • Obtain a new e-mail account or use the current one. For availability of your e-mail account contact your e-mail service provider.
Download e-mail 1. To access the e-mail application, select Menu > Messaging > E-mail. 2. To download e-mail messages that have been sent to your e-mail account, select Retrieve. To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Retrieve and send. To download first the headings of the new e-mail messages that have been sent to your e-mail account, select Options > Check new e-mail.
Inbox and other folders Your phone saves e-mail that you have downloaded from your e-mail account in Inbox folder. Other folders contains the following folders: Drafts for saving unfinished e-mail, Archive for organizing and saving your e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options > Manage folder.
To set the required settings for the instant messaging service, see Connect. settings in Access the IM menu p. 47. The icons and texts on the display may vary, depending on the instant messaging service. Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Access the IM menu To access the menu while still offline, select Menu > Messaging > Instant messages.
Start an IM session Open the Instant messages menu, and connect to the service. Start the service in different ways. Select Conversations to view the list of new and read instant messages or invitations for instant messaging during the active instant messaging session. Scroll to the message or invitation that you want, and select Open to read the message. indicates the new and read group messages. indicates the new and the read instant messages. indicates the invitations.
Select Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID. To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group. Start a conversation from Contacts, see View the subscribed names p. 63.
IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact. Participate in a conversation To join or start an instant messaging session, select Write. Write your message, and select Send or press the call key to send it. Select Options to access available options. Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2.
Contacts for IM To add contacts to the instant messaging contacts list, connect to the instant messaging service, and select IM contacts. To add a contact to the list, select Options > Add contact or Add (if you have no contacts added) > Enter ID manually, Search from serv., Copy from server, or By mobile number. Scroll to a contact. To start a conversation, select Chat or Options and from the available options.
Public groups Groups — You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups.
■ Info messages Select Menu > Messaging > Info messages. With the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. ■ Service commands Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services.
Save sent messages > Yes — set the phone to save the sent messages in the Sent items folder Font size — to change the font size for reading and writing messages. Large font is only available for Latin fonts. Graphical smileys > Yes — to replace character-based smileys with graphical ones Text messages and SMS e-mail The message settings affect the sending, receiving, and viewing of messages.
Character support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. When writing a message, you can check how the message will look to the recipient by previewing the message. See Write and send a SMS message p. 37.
Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No. Configuration settings > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and select a multimedia messaging service account contained in the active configuration settings. E-mail The settings affect the sending, receiving, and viewing of e-mail.
SMTP user name — Enter the name that you want to use for outgoing mail. SMTP password — Enter the password that you want to use for outgoing mail. Display terminal window > Yes — To perform manual user authentication for intranet connections. Incoming server type > POP3 or IMAP4 — Identify the type of e-mail system that you want to use. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4. Copyright © 2006 Nokia. All rights reserved.
7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM card memory, are indicated by . ■ Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first letter of the name for which you are searching.
When you select a name (for example, to make a call), the default number is used unless you select another number. 1. Make sure that the memory in use is either Phone or Phone and SIM. See Settings p. 64. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail. 3. To add a number, select Number and one of the number types. To add another detail, select a text type or an image from Gallery.
■ Edit contact details 1. Search for the contact you want to edit, select Details, and scroll to the desired name, number, text item, or image. 2. To edit a name, number, or text item, or to change an image, select Options > Edit. You cannot edit an ID when it is on the IM contacts or Subscribed names list. ■ Delete contacts or contact details To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone mem.
To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia, Via text message, Via infrared, or Via Bluetooth. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.
Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service View my presence — to view the status in Private pres.
3. Select a contact from the list and if the contact has an user ID saved, the contact is added to the subscribed names list. View the subscribed names To view the presence information, see Search for a contact p. 58. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed.
■ Settings Select Menu > Contacts > Settings and from the following options: Memory in use — to select SIM card or phone memory for your contacts Contacts view — to select how the names and numbers in contacts are displayed Name display — to view the Last name first or the First name first in the contacts list Font size — to change the font size for reading and writing messages. Large font is only available for Latin fonts.
• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. • Very short names are not accepted. Use long names and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. Add and manage voice tags Save or copy to the phone memory the contacts for which you want to add a voice tag.
Make a call by using a voice tag If the phone has an application running that is sending or receiving data using a packet data connection, you must end the application before voice dialing. 1. In the standby mode, press and hold the volume down key or the right selection key. A short tone is heard, and Speak now is displayed. 2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds.
■ Info, service, and my numbers Select Menu > Contacts and from one of these submenus: Info numbers — to call the information numbers of your service provider if the numbers are included on your SIM card (network service) Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers — to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card Copyright © 2006 Nokia. All rights reserved.
8. Log The phone registers the phone numbers of identified missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions. ■ Recent calls lists Select Menu > Log > Call log, Missed calls, Received calls, Dialled numbers, or Message Recipients to view the call lists.
■ Positioning information The network may send you a positioning request. You can ensure that the network delivers positioning information of your phone only if you approve it (network service). Contact your network operator to subscribe and to agree upon the delivery of positioning information. To accept or reject the positioning request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator.
9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed, and set the time the profile setting shall end.
■ Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Select Menu > Settings > Themes and from the following options: Select theme — to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes. See Download files p. 124. ■ Tones You can change the settings of the selected active profile.
■ Display Standby mode settings Select Menu > Settings > Display > Standby mode settings and from the following options: Active standby — to switch the active standby mode on or off and to organize and personalize the active standby mode. See Active standby mode p. 25. Wallpaper — to add the background image to the display in standby mode. To activate, or deactivate the wallpaper, select On or Off.
Screen saver > On — to activate the screen saver for the main display. To set the time after which the screen saver is activated, select Time-out. Select Screen savers to choose an Image, a Slide set, or a Video clip from the Gallery or Digital clock to be used as screensaver. To download more images for the screen saver, select Graphic downloads. Power saver > On — to save some battery power. A digital clock is displayed when no function of the phone is used for a certain time.
Left and right selection key To set one phone function from a predefined list to the left or right selection key, select Menu > Settings > My shortcuts > Left selection key or Right selection key. See Standby mode p. 25. These menus may not be shown, depending on your service provider. Navigation key To assign other phone functions from a predefined list to the navigation key, select Menu > Settings > My shortcuts > Navigation key.
■ Connectivity You can connect the phone to a compatible device using an infrared, Bluetooth wireless technology, or USB data cable connection. You can also define the settings for packet data dial-up connections. Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.
Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth. Select from the following options: Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates an active Bluetooth connection. Search for audio enhancements — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range.
If you are concerned about security, turn off Bluetooth or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone.
When blinks, your phone is trying to connect to the other device, or a connection has been lost. Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)based network. GPRS is a data bearer that enables wireless access to data networks such as the Internet. Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections.
To define the settings for packet data connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, enter a name to change the access point settings, and select OK. Select Packet data access point, enter the access point name (APN) to establish a connection to an packet data network, and select OK.
To edit the copy and synchronize settings, select a contact from the partner list and Options > Edit. To delete a partner, select a contact from the partner list and Options > Delete, and confirm Delete transfer contact?. You cannot delete Server sync or PC sync. Data transfer with a compatible device For synchronization, Bluetooth wireless technology or infrared is used. The other device is in the standby mode.
Synchronize from a compatible PC Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology, infrared, or a USB data cable for the synchronization, and start the synchronization from the PC. Synchronize from a server To use a remote Internet server, you must subscribe to a synchronization service.
To activate the phone for data transfer or picture printing, connect the data cable; when the phone displays USB data cable connected. Select mode., select OK. Select from the following modes: Default mode — to use the cable for PC Suite Printing — to print pictures directly from the phone using a compatible printer To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, or Printing.
Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Set by network, Yes or No (network service) Line for outgoing calls — to select the phone line 1 or 2 to make calls, if supported by your SIM card (network service) Slide call handling — to change the slide opening function to answer and end a call when the slide is opened or closed ■ Phone Select Menu > Settings > Phone and from the following options: Language se
When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Cell info display > On — to receive information from the network operator depending on the network cell used (network service) Welcome note — to enter a welcome note to be shown briefly when the phone is switched on Operator selection > Automatic — to set the phone automatically to select one of the cellular networks available in your area.
Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press. Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly.
Activate default in all applications — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card Closed user group — to specify a group of people whom you can call and who can call you (network service) Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when SIM card memory is selected and you want to change the memory in use.
10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see Service inbox p. 124. Copyright © 2006 Nokia. All rights reserved.
11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.
12. Media Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Keep a safe distance when using the flash.
still photo and video mode. Press the navigation key up and down, or the volume keys to zoom in and out. Take a photo To take a photo in the select Capture, or press the camera release key. The phone saves the photo in Gallery > Images. To take another photo, select Back; to send the photo as a multimedia message, select Send. To take a self-portrait, turn the camera towards yourself, use the small mirror besides the camera lens as a view finder, and press the camera release key.
Camera settings Select Options >Settings to define image, video and camera parameters: Image quality — to define the compression rate or quality of the images. The higher the image quality, the lower the compression rate. Higher image quality uses more memory space. Image size — to define the image resolution or size. Image resolution is expressed by multiplying the number of horizontal dots (width) by the number of vertical dots (height). The higher the resolution, the higher the image quality.
■ Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service). Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads. While streaming audio or video, to rewind (Rew) or fast forward (FF) scroll left or right. To set the length of a scrolling jump, select FF/Rew interval.
■ Music player Your phone includes a music player for listening to music tracks, recordings, or other MP3, MP4, or AAC sound files that you have transferred to the phone with the Nokia Audio Manager application. MP3 and AAC files are stored in the Gallery folders. Music files stored in the Music files folder and in another location, such as a folder of the phone memory, are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player.
Music player options Select Music player > Options. Some of following features may be available: Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select Play.
Music downloads — to connect to a browser service related to the current track. This function is only available when the address of the service is included in the track. Memory status — to view the free and used memory capacity ■ Radio The FM radio depends on an antenna other than the wireless device's antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level.
Tune a radio frequency 1. When the radio is on, select , or to change the radio frequency in 0.05 MHz steps, or select and hold , or to start the channel search. Searching stops when a channel is found. 2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key. To save the channel in the memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key 0 to 9. 3. Enter the name of the channel, and select OK.
Select Options > Visual radio sett. > Station directory to access a Web site with a list of radio stations, and if available, their visual radio ID, which you can receive in your region. To select the list of saved channels, select Options > Stations. To delete or rename a channel, or to enter the ID for a visual radio channel, scroll to the desired channel, and select Options > Delete station, Rename, or Visual service ID.
■ Recorder You can record pieces of speech, sound, or an active call for up to 60 minutes, depending on available memory space. The recorder cannot be used when a data call or packet data connection is active. Record sound 1. Select Menu > Media > Recorder. To use the graphical keys, , the desired key, and select it. , or , on the display, scroll left or right to 2. To start the recording, select . To start the recording during a call, select Options > Record.
■ Equalizer To control the sound quality when using the music player, amplify or diminish frequency bands. Select Menu > Media > Equaliser. To activate a set, scroll to one of the equalizer sets, and select Activate. To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed. Copyright © 2006 Nokia. All rights reserved.
13. Push to talk Select Menu > Push to talk. Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator.
You can set the status of each channel to Default, Listened, or Inactive. Default and Listened are active channels. When you press the volume up key to make a channel call, the default channel is called if you have not scrolled to any other channel or contact.
4. To set the status for the channel, select Default, Listened, or Inactive. To reject the invitation, select Exit > Yes, or select View > Discard > Yes. ■ Switch PTT on and off To connect to the PTT service, select Menu > Push to talk > Switch PTT on or press the PTT (volume up) key. indicates the PTT connection. indicates that the service is temporarily unavailable.
, or indicate that the person is either available or unknown. indicates that the person wants not to be disturbed, but can receive callback requests. indicates that the person has PTT not switched on. Make a channel call To make a call to the default channel, press the volume up key. A tone indicates that the access is granted, and the phone displays your nickname and channel name.
Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and need to accept the call in order to participate. If supported by your network operator, you also may select contacts with a phone number but without PTT number. For details, contact your network operator. 1. Select Menu > Push to talk > Contacts list, and mark the desired contacts. 2. Press the volume up key briefly to start the call.
■ Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. To send a callback request from Contacts, search for the desired contact, and select Details.
To send a call request back to the sender, select Options > Send callback. To delete the request, select Delete. To save a new contact or to add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact. ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: To add a PTT address to a name in Contacts, search for the desired contact, select Details > Options > Add detail > PTT address.
may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.
Other parameters are PTT user name, Default nickname, PTT password, Domain, and Server address. ■ Web Select Menu > Push to talk > Web to access the Internet site of your push to talk provider. Copyright © 2006 Nokia. All rights reserved.
14. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar Select Menu >Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
select View. To stop the alarm for approximately 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save notes for tasks that you must do, select Menu > Organiser > To-do list. To create a note if no note is added, select Add note; otherwise, select Options > Add. Write the note, and select the priority, the deadline, and the alarm type for the note. Then select Save. To view a note, scroll to it, and select View.
IR or Bluetooth. If the note is too long to send as a text message, the phone asks you to delete the appropriate number of characters from your note. ■ Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values. Note: This calculator has limited accuracy and is designed for simple calculations. Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation.
■ Countdown timer Select Menu > Organiser > Timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up.
Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key Continue — to view the timing that you have set in the background Show last — to view the most recently measured time if the stopwatch is not reset View times or Delete times — to view or delete the saved times Copyright © 2006 Nokia. All rights reserved.
15. Applications ■ Games Your phone software includes games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see Other application options p. 117. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. To access the list of bookmarks in the Web menu, see Bookmarks p. 123.
■ Collection Your phone software includes Java applications specially designed for this Nokia phone. Launch an application Select Menu > Applications > Collection. Scroll to an application, and select Open. Other application options Delete — to delete the application or application set from the phone Details — to view additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) App.
Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications in different ways. Select Menu > Applications > Options > Downloads > App. downloads. The list of available bookmarks is shown. Select the appropriate bookmark to connect to the desired page. For the availability of different services, pricing, and tariffs, contact your service provider. Use the game download function.
16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these network services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See Set up browsing p. 119. Select Account and a browsing service account contained in the active configuration settings. Select Display terminal window > Yes to perform manual user authentication for intranet connections.
indicate that the packet data connection is suspended (on hold). After a call the phone tries to reconnect the packet data connection. Browse with phone keys Use the navigation keys to browse through the page. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the keys, 0 to 9. To enter special characters, press *. Options while browsing In addition to the options available on your device, your service provider may offer other options.
Font size to set the font size. Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures Alerts > Alert for unsecure connection > Yes — to set the phone to alert when an encrypted connection changes to unencrypted during browsing Alerts > Alert for unsecure items > Yes — to set the phone to alert when an encrypted page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see Browser security p. 126.
■ Scripts over secure connection You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts. 1. While browsing, select Options > Other options > Security settings > WMLScript sett.; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection. 2. To allow the scripts, select Allow. ■ Bookmarks You can save page addresses as bookmarks in the phone memory. 1.
Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark in the bookmark folder, select Show. To discard the bookmark directly after you have received the bookmark, select Exit ■ Download files To download more tones, images, games, or applications to your phone (network service), select Menu > Gallery or Applications > Options >Downloads and from the available downloads.
To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service message, select Service messages > On or Off.
■ Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature.
Certificates Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown. Check that the header text is Read and that the digital signature icon shown.
17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
18. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an infrared, Bluetooth wireless technology, or a USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ PC Suite With PC Suite you can synchronize Contacts, Calendar, To-do list, and Notes between your phone, and the compatible PC, or a remote Internet server (network service).
■ Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing down. Do not move the phone by holding it in your hand during a data call. Copyright © 2006 Nokia. All rights reserved.
19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. Copyright © 2006 Nokia. All rights reserved.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Copyright © 2006 Nokia. All rights reserved.
Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.
Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
■ Certification information (SAR) This mobile device meets guidelines for exposure to radio waves Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
Index appearance settings ........121 bookmarks ..........................123 browsing pages .................120 cache memory ...................125 certificates .........................127 cookies ................................122 digital signature ...............128 script settings ....................123 security module ................126 set up ...................................119 business cards ............................. 60 A AAC ................................................
answer .................................. 31 call waiting .......................... 32 international ....................... 30 make a voice dialing call . 66 making of ............................. 30 options during call ............ 32 recent calls list ................... 68 reject ..................................... 31 speed dialling ...................... 31 camera .......................................... 90 care .............................................. 136 certificates .....................
counters ....................................... 68 CSD .............................................. 130 customer service ........................ 16 IMAP4 .................................... 44 POP3 ...................................... 44 emergency calls ........................141 end call ......................................... 30 end key .......................................... 23 enhancements ............................ 12 settings ................................. 84 equalizer .............
availability ............................ 50 block ...................................... 51 contacts ................................ 51 groups .................................... 51 private ........................... 52 public ............................. 52 participate in a conversation 50 read ........................................ 49 reject invitation .................. 49 service ................................... 47 start session ......................... 48 unblock ............................
end key ................................. 23 keyguard ............................... 29 keypad ................................... 23 keypad lock .......................... 29 navigation key .................... 23 power on/off ....................... 24 PTT key .................................. 24 push to talk key .................. 24 selection keys ............... 23, 25 volume keys ......................... 24 L language ...................................... 33 language settings ....................
messaging .................................... 36 SMS ....................................... 36 text messages ..................... 36 MMS see multimedia messages modem settings ......................... 78 MP3 ............................................... 94 MP4 ............................................... 94 multimedia messages ............... 38 music player ................................ 94 AAC ........................................ 94 MP3 ....................................... 94 MP4 .......
P pacemakers ............................... 139 packet data ........................78, 130 parts .............................................. 23 PC connectivity ........................ 130 PC Suite ...................................... 130 personal shortcuts ..................... 73 phone care ...................................... 136 configuration ...................... 85 keys ........................................ 23 maintenance ..................... 136 open slide .............................
PUK codes .................................... 14 Push to talk see PTT Push to talk key ......................... 24 pushed messages ..................... 124 R radio visual radio .......................... 97 recent calls list ........................... 68 recorder ........................................ 99 list of recordings ................ 99 record sound ....................... 99 repair service .............................. 16 ringing tones ..............
data transfer ....................... 79 date ................................. 73, 82 display ................................... 72 EGPRS .................................... 78 enhancements .................... 84 infrared ................................. 77 IR ............................................ 77 messages .............................. 53 modem settings .................. 78 packet data .......................... 78 personal shortcuts ............. 73 phone settings ....................
voice commands ........................ 65 assign function to .............. 74 voice dialing add voice tags ..................... 65 make a call ........................... 66 manage voice tags ............. 65 voice messages ........................... 52 voice tags ..................................... 65 volume keys ................................. 24 T take a photo ................................ 91 templates ..................................... 38 text character case ....................
