User guide 9238109 Issue 2
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-76 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is".
Contents For your safety .................................................................................................. 12 General information.......................................................................................... 16 Overview of functions ............................................................................................................................. 16 Access codes ............................................................................................................
Personal shortcut list ........................................................................................................................... 28 Shortcuts in the standby mode......................................................................................................... 29 Power saving .......................................................................................................................................... 29 Indicators...........................................................
Flash messages.......................................................................................................................................... 46 Write a flash message ......................................................................................................................... 46 Receive a flash message ..................................................................................................................... 46 Nokia Xpress audio messaging ...................................
Message settings ...................................................................................................................................... 58 Text and SMS e-mail............................................................................................................................ 58 Multimedia.............................................................................................................................................. 59 E-mail ...............................................
9. Settings ......................................................................................................... 72 Profiles......................................................................................................................................................... 72 Themes......................................................................................................................................................... 72 Tones .........................................................
Listen to the radio................................................................................................................................. 89 Recorder ...................................................................................................................................................... 90 Record sound.......................................................................................................................................... 90 List of recordings.........................
15.Push to talk ................................................................................................ 102 Push to talk menu ................................................................................................................................. Connect to and disconnect PTT ......................................................................................................... Make and receive a PTT call ...................................................................................
Service inbox settings....................................................................................................................... Cache memory........................................................................................................................................ Positioning information....................................................................................................................... Browser security .............................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
USE SENSIBLY Use only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.
■ About your device The wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect the privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
content and application download, and synchronization with a remote Internet server, require network support for these technologies. ■ Shared memory The phone has two memories. The following features may share the first memory: contacts, text messages, multimedia messages (but no attachments), instant messaging, groups, voice commands, calendar, and to-do notes. The second shared memory is used by files stored in Gallery, attachments of multimedia messages, e-mail, and JavaTM applications.
General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE), see “Packet data (EGPRS),” p. 79 • Extensible hypertext markup language (XHTML), see “Web,” p. 112 • Audio messaging, see “Nokia Xpress audio messaging,” p. 46 • Instant messaging, see “Instant messaging (IM),” p.
PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 82. The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions. The module PIN is required to access the information in the security module. See “Security module,” p. 120. The signing PIN is required for the digital signature. See “Digital signature,” p. 122.
■ Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings.
■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software.
1. Get started ■ Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
To remove the back cover of the phone press the release buttons (1), and slide the back cover to remove it from the phone (2). Remove the battery as shown(3). Release the SIM card holder (4). Insert the SIM card (5). Make sure that the SIM card is properly inserted, and that the golden contact area on the card is facing downwards. Close the SIM card holder (6) and press it until it snaps into position. Replace the battery (7). Observe the battery contacts. Always use original Nokia batteries.
■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3, AC-4, and DC-4 charger, and from AC-1, ACP-7, ACP-12, and LCH-12 charger when used with the charger adapter CA-44 delivered with your phone.
■ Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press and hold the end key. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK. Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query.
■ Wrist strap Remove the back cover and the battery. Insert the strap as shown in the picture. Replace the battery and the back cover. Copyright © 2005 Nokia. All rights reserved.
2. Your phone ■ Keys and parts • Earpiece (1) • Main display (2) • Left selection key (3) Middle selection key (4) Right selection key (5) The function of these keys depends on the guiding text shown on the display above the keys. • Volume key (6) • 4-way navigation key (7) Scroll up, down, left, and right. • Call key (8) • Push to talk (PTT) key, and camera release key (9) • Infrared (IR) port (10) • End key and power key (11) • Charger connector (12) Copyright © 2005 Nokia. All rights reserved.
• Pop-PortTM connector (13) • Microphone (14) • Loudspeaker (15) • Camera lens (16) • Mini display (17) Copyright © 2005 Nokia. All rights reserved.
■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Main display • Name of the network or the operator logo (1) • Signal strength of the cellular network at your current location (2) • Battery charge level (3) • Left selection key is Go to (4). • Middle selection key is Menu (5) • Right selection key is Names (6) or another shortcut to a function that you selected. See “My shortcuts,” p. 73. Operator variants may have an operator-specific name to access an operator-specific Web site. Personal shortcut list The left selection key is Go to.
To rearrange the functions on your personal shortcut list, select Go to > Options > Organise. Select the desired function and Move and the place where you want to move the function. Shortcuts in the standby mode • To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; and to call the number, press the call key. • To open the web browser, press and hold 0. • To call your voice mailbox, press and hold 1. • Use the navigation key as a shortcut.
Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 40. You received one or several multimedia messages. See “Read and reply to a multimedia message,” p. 43. The phone registered a missed call. See “Call register,” p. 71. The keypad is locked. See “Keypad lock (keyguard),” p. 31. The phone does not ring for an incoming call or text message when Incoming call alert and Message alert tone are set to Off. See “Tones,” p. 73. The alarm clock is set to On.
■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad. To unlock the keypad, select Unlock, and press *. If the Security keyguard is set On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see “Phone,” p. 77.
3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or close the phone.
Speed dialing Assign a phone number to one of the speed-dialing keys, 2 to 9. See “Speed dials,” p. 70. Call the number in either of the following ways: • Press a speed-dialing key, and then press the call key. • If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in “Call,” p. 76. ■ Answer or reject a call To answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone.
Call waiting To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see “Call,” p. 76. ■ Options during a call Many of the options that you can use during a call are network services. For availability, contact your network operator or service provider.
4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top left of the display. , , or appear next to the text input indicator, indicating the character case.
1. Start writing a word using the 2 to 9 keys. Press each key only once for a single letter. The word changes after each keypress. 2. When you have finished writing the word and it is correct, to confirm it, press 0 to add a space, or press any of the navigation keys. Press a navigation key to move the cursor. If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, confirm it.
5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu, and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer). 5.
6. Messages The message services can only be used if they are supported by your network or your service provider. Note: When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.
Read and reply to a SMS message is shown when you received an SMS message or an SMS e-mail. The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages in the Inbox folder. 1. To view a new message, select Show. To view it later, select Exit. To read the message later, select Menu > Messages > Inbox. If more than one message is received, select the message that you want to read. indicates an unread message. 2.
Templates Your phone has text templates and picture templates text, picture, or SMS e-mail messages. that you can use in To access the template list, select Menu > Messages > Saved items > Text messages > Templates. ■ Multimedia messages (MMS) A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it.
Image, Sound clip or Video clip — to insert a file from Gallery New image opens the Camera — to take a new image to be added to the message New sound clip opens the Recorder — to make a new record to be added to the message Business card or Calendar note — to insert a business card or a calendar note in the message. Slide — to insert a slide to the message. Your phone supports multimedia messages that contain several pages (slides).
While the multimedia message is being sent, the animated indicator is displayed and you can use other functions on the phone. If the sending fails, the phone tries to resend it a few times. If this fails, the message remains in the Outbox folder, and you can try to resend it later. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See “Multimedia,” p. 59.
To view the whole message if the received message contains a presentation, a sound clip, or view a video clip, select Play. To zoom in on an image, select Zoom. To view a business card or calendar note or to open a theme object, select Open. 3. To reply to the message, select Options > Reply > Text message, Multimedia msg., or Flash message. Enter the reply message, and select Send. You can send the reply message only to the person who sent you the original message.
■ Folders The phone saves received text and multimedia messages in the Inbox folder. Multimedia messages that have not yet been sent are moved to the Outbox folder. If you have selected Message settings > Text messages > Save sent messages > Yes, and Message settings > Multimedia msgs. > Save sent messages > Yes, the sent messages are saved in the Sent items folder.
■ Flash messages Flash messages are text messages that are instantly displayed upon reception. Write a flash message Select Menu > Messages > Create message > Flash message. Write your message. The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select Insert blink char. from the options list to set a marker. The text after the marker blinks until a second marker is inserted. Receive a flash message A received flash message is not automatically saved.
2. When the message is ready to send, select Options > Play to check the message before sending, Replace sound clip to repeat the recording, Save message, Save sound clip to save the recording in Gallery, Edit subject to insert a subject to the message, Message details to view the message details, or Loudspeaker or Handset. 3. To send the message, select Send > Recently used, To phone number, To e-mail address, or To many. Depending on your operator, more options may be available. 4.
■ Instant messaging (IM) Instant messaging (network service) is a way to send short, simple text messages to online users. Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and settings. To set the required settings for the instant messaging service, see Connect. settings in “Access the instant messaging menu,” p.
Connect. settings — to edit the settings needed for messaging and presence connection Connect to the instant messaging service To connect to the instant messaging service, enter the Instant messages menu, activate an instant messaging service, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Logout. Start an instant messaging session Open the Instant messages menu, and connect to the service.
• IM contacts ito view the contacts that you have added. Scroll to the contact with whom you would like to chat and select Chat or Open if a new contact is shown in the list. To add contacts see “Contacts for instant messaging,” p. 52. indicates the online and the offline contacts in the phone contacts memory. indicates a blocked contact. indicates a contact that has been sent a new message.
want, and select Open. To join the private group conversation, select Accept, and enter the screen name; or to reject or delete the invitation, select Options > Reject or Delete. Read a received instant message In the standby mode, when you are connected to the instant messaging service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read.
Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2. To view and edit your own availability information, or screen name, select My settings. 3. To allow all the other instant messaging users to see you when you are online, select Availability > Available for all. To allow only the contacts on your instant messaging contact list to see you when you are online, select Availability > Avail. for contacts.
Block and unblock messages To block messages, connect to the instant messaging service, and select Conversations > IM contacts; or join or start a conversation. Scroll to the contact from whom you want to block incoming messages, select Options > Block contact > OK. To unblock the messages, connect to the instant messaging service, and select Blocked list. Scroll to the contact from whom you want to unblock the messages, and select Unblock.
Create a private group Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation. ■ E-mail application The e-mail application allows you to access your compatible e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS and MMS e-mail function.
Write and send an e-mail 1. Select Menu > Messages > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, a subject, and the e-mail message. To attach a file to the e-mail, select Options > Attach and the file in Gallery. 3. Select Send > Send now. Download e-mail 1. To access the e-mail application, select Menu > Messages > E-mail. 2. To download e-mail messages that have been sent to your e-mail account, select Retrieve.
Select Menu > Messages > E-mail > Inbox and select the desired message. While reading the message, select Options to view the available options. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply. To send the message, select Send > Send now. Inbox and other folders Your phone saves e-mail that you have downloaded from your e-mail account in Inbox folder.
■ Voice messages The voice mailbox is a network service and you may need to subscribe to it. For details, contact your service provider. To call your voice mailbox, select Menu > Messages > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, indicates that there are new voice messages. Select Listen to call your voice mailbox number. ■ Info messages Select Menu > Messages > Info messages.
■ Delete messages To delete all messages from a folder, select Menu > Messages > Delete messages and the folder from which you want to delete the messages. Select Yes, and if the folder contains unread messages, the phone asks whether you want to delete them also. Select Yes again. ■ Message settings Text and SMS e-mail The message settings affect the sending, receiving, and viewing of messages.
Multimedia The message settings affect the sending, receiving, and viewing of multimedia messages. Select Menu > Messages > Message settings > Multimedia msgs.
Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No. E-mail The settings affect the sending, receiving, and viewing of e-mail. You may receive the configuration settings for the e-mail application as a configuration message. See “Configuration settings service,” p. 18. You can also enter the settings manually. See “Configuration,” p. 81.
Incoming server type — Select either POP3 or IMAP4, depending on the type of email system that you are using. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4. Other settings To select other settings for messages, select Menu > Messages > Message settings > Other settings. To change the font size for reading and writing messages, select Font size. To replace character-based smileys with graphical ones select Graphical smileys > Yes.
7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM card memory, are indicated by . ■ Search for a contact Select Menu > Contacts > Names > Options > Search. Scroll through the list of contacts or enter the first letter of the name for which you are searching.
When you select a name (for example, to make a call), the default number is used unless you select another number. 1. Make sure that the memory in use is either Phone or Phone and SIM. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail. 3. To add a number, select Number and one of the number types. To add another detail select a text type or an image from Gallery.
■ Edit contact details 1. Search for the contact you want to edit, select Details, and scroll to the desired name, number, text item, or image. 2. To edit a name, number, or text item, or to change an image, select Options > Edit name, Edit number, Edit detail, or Change image. You cannot edit an ID when it is on the IM contacts or Subscribed names list.
To send a business card, search for the contact whose information you want to send, and select Options > Send bus. card > Via multimedia, Via text message, or Via infrared. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes. ■ My presence With the presence service (network service) you can share your presence status with other users with compatible devices and access to the service.
Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service. View my presence — to view the status in Private pres. and Public presence. Edit my presence — to change your presence status. Select My availability, My presence message, My presence logo, or Show to.
3. Select a contact from the list and if the contact has an user ID saved, the contact is added to the subscribed names list. View the subscribed names To view the presence information, see “Search for a contact,” p. 62. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed.
■ Settings Select Menu > Contacts > Settings and from the following options: Memory in use — to select SIM card or phone memory for your contacts Contacts view — to select how the names and numbers in contacts are displayed Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. Add and manage voice tags Save or copy the contacts to the phone memory for which you want to add a voice tag. You can also add voice tags to the names in the SIM card, but if you replace your SIM card with a new one, you must first delete the old voice tags before you can add new ones. 1. Search for the contact to which you want to add a voice tag.
2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change.
8. Call register The phone registers the phone numbers of identified missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions.
9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end.
Theme downloads — to open a list of links to download more themes. See “Download files,” p. 117. ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones. Select and change Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, Push to talk settings, Message alert tone, Instant message alert tone, Keypad tones, and Warning tones. You can find the same settings in the Profiles menu. See “Profiles,” p. 72.
shortcut function from the key, select (empty). To reassign a function for the key, select Assign. This menu may not be shown, depending on your service provider. Voice commands — to activate phone functions by saying a voice tag. Select a folder, scroll to a function to which you want to add a voice tag, and select Add. indicates a voice tag. To add a voice command, see “Add and manage voice tags,” p. 69. To activate a voice command, see “Make a call with a voice tag,” p. 69.
Colour schemes — to change the color in some display components, for example, menu background color and signal and battery bar colors. Idle state font colour — to select the color for the texts on the display in the standby mode. Operator logo — to set your phone to display or hide the operator logo. The menu is dimmed, if you have not saved the operator logo. For more information on availability of an operator logo, contact your network operator or service provider.
■ Call Select Menu > Settings > Call and from the following options: Automatic volume control — to set the phone to automatically adjust the speaker volume according to the background noise Call divert (network service) — to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. See Call barring service in “Security,” p. 82.
■ Phone Select Menu > Settings > Phone and from the following options: Phone language — to set the display and writing language Memory status — to view the free memory and the used memory in Gallery, Messages, and Applications Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes.
Start-up tone — to select whether the phone plays a start-up tone when the phone is switched on ■ Connectivity You can connect your phone to compatible devices using an infrared connection. You can also define the settings for packet data dial-up connections. Infrared You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant.
IR connection indicator When is shown continuously, the IR connection is activated, and your phone is ready to send or receive data through its IR port. When blinks, your phone is trying to connect to the other device, or a connection has been lost. Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network.
Modem settings You can connect the phone using an IR or a data cable (CA-42) connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name for the currently selected access point.
Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly.
Activate default in all applications — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card Closed user group (network service) — to specify a group of people whom you can call and who can call you Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when SIM card memory is selected and you want to change the memory in use.
10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 118. Copyright © 2005 Nokia. All rights reserved.
11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.
Zoom — to increase the size of the image Mute audio (Unmute audio) — to mute (unmute) the sound file Set contrast — to adjust the contrast level of the image Activate content — to update the activation key of the selected file. The option is only shown if the activation key updating is supported by the file. Activation key list — to view the list of all available activation keys. You can delete the activation keys (for example, delete the expired ones). Copyright © 2005 Nokia. All rights reserved.
12. Media Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.
recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options. ■ Radio The FM radio depends on an antenna other than the wireless devices antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.
Listen to the radio Select Menu > Media > Radio. To scroll to the desired channel, select or or press the headset key To select a radio channel location, briefly press the corresponding number keys. Select Options and from the following options: Switch off — to turn off the radio Save channel — to save a new channel, and enter the channels name Channels — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and select Options > Delete channel or Rename.
■ Recorder You can record pieces of speech, sound, or an active call for 5 minutes. The recorder cannot be used when a data call or packet data connection is active. Record sound 1. Select Menu > Media > Recorder. To use the graphical keys, , the desired key, and select it. , or , on the display, scroll left or right to 2. To start the recording, select . To start the recording during a call, select Options > Record.
13. Organiser ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar Select Menu >Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
select View. To stop the alarm for approximately 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save notes for tasks that you must do, select Menu > Organiser > To-do list. To create a note if no note is added, select Add note; otherwise, select Options > Add. Write the note, and select Save. Select the priority, the deadline, and the alarm type for the note. To view a note, scroll to it, and select View.
the note is too long to send as a text message, the phone asks you to delete the appropriate number of characters from your note. ■ Synchronization Synchronization allows you to save your calendar and Contacts data on a remote Internet server (network service) or on a compatible PC. If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone.
2. Select Menu > Organiser > Sync > Server sync > Data to be synchronised. Mark the data to be synchronized. 3. Select Menu > Organiser > Sync > Server sync > Synchronise. The marked data of the active set is synchronized after confirmation. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete, if the contacts or calendar are full.
Synchronize from a compatible PC To synchronize Contacts, Calendar, and Notes from a compatible PC, use an IR, or data cable connection. You also need Nokia PC Suite software of your phone installed on the PC. Start the synchronization from the PC using Nokia PC Suite. ■ Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values. Note: This calculator has limited accuracy and is designed for simple calculations.
■ Stopwatch To measure time, take intermediate times, or take lap times, use the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key. Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options: Split timing — to take intermediate times.
■ Countdown timer Select Menu > Organiser > Timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer. If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up.
14. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 100. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See “Bookmarks,” p. 116.
■ Collection Your phone software includes some Java applications specially designed for this Nokia phone. Launch an application Select Menu > Applications > Collection. Scroll to an application, and select Open; or press the call key.
Download an application Your phone supports J2METM Java applications. Make sure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications in different ways. Select Menu > Applications > Options > Downloads > App. downloads. The list of available bookmarks is shown.
15. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect to, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the person or group you are calling does not have to answer the phone.
■ Push to talk menu Select Menu > Push to talk. • To connect to or disconnect from the PTT service, select Switch PTT on or Switch PTT off. • To view the received callback requests, select Callback inbox. • To view the list of PTT groups, select Group list. • To view the list of contacts to which you have added the PTT address received from the service provider, select Contacts list. • To add a new PTT group to the phone, select Add group. • To set the PTT settings for use, select PTT settings.
■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive dial out calls, group calls or one-to-one calls. One-to-one calls are calls you make to only one person. Make a dial out PTT call For a dial-out PTT call you can select multiple PTT contacts from the contact list.
Make a group call To make a call to the default group, press the PTT key. A tone sounds, indicating that the access is granted, and the phone displays your nickname and group name. To make a call to a non-default group, select Group list in the PTT menu, scroll to the desired group, and press the PTT key. Press and hold the PTT key the entire time you are talking, and hold the phone in front of you so that you can see the display. When you have finished, release the PTT key.
displayed. When receiving a one-to-one call from a person whose information you have saved in Contacts, the saved name is displayed if identified; otherwise, only the nickname of the caller is displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls. If you press the PTT key to try to respond to a group while another member is talking, you hear a queuing tone, and Queuing is displayed as long as you press the PTT key.
• To send a callback request from Contacts, search for the desired contact, select Options > Contact details, scroll to the PTT address, and select Options > Send callback. • To send a callback request from the group list in the PTT menu, select Group list, and scroll to the desired group. Select Options > Active members, scroll to the desired contact, and select Options > Send callback. • To send a callback request from the callback request list in the Push to talk menu, select Callback inbox.
■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: • To add a PTT address to a name in Contacts, search for the desired contact, and select Options > Add detail > PTT address. • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the group list, connect to the Push to talk service, select Group list, and scroll to the desired group.
• Provisioned groups are closed groups that allow only selected participants provisioned by the service provider to join. • Ad hoc groups are groups that the users can create. You can create your own group, and invite members to the group. • Ad hoc pro groups are groups you can create from members in a provisioned group. For example, a business can have a closed group and separate groups created for certain business functions. Add a group 1. Select Menu > Push to talk > Add group > Guided. 2.
Receive an invitation 1. When you receive a text message invitation to a group, Group invitation received: is displayed. 2. To view the nickname of the person who sent the invitation and the group address if the group is not a private group, select View. 3. To add the group to your phone, select Save. To set the status for the group, select Default, Listened, or Inactive. To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
To edit the PTT settings for use, select Menu > Push to talk > PTT settings. To select the phone to allow the reception of incoming one-to-one calls, select 1 to 1 calls > On. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify. To activate the listened groups, select Listened groups > On.
16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 112. Select Account and a browsing service account contained in the active configuration settings. Select Display terminal window > Yes to perform manual user authentication for intranet connections.
during a packet data connection, is shown on the top right of the display to indicate that the packet data connection is suspended (on hold). After a call the phone tries to reconnect the packet data connection. Browse with phone keys Use the navigation keys to browse through the page. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the keys, 0 to 9. To enter special characters, press *. Options while browsing Nokia.
■ Appearance settings While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options: Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated. Font size > Extra small, Small, or Medium — to set the font size Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.
■ Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 119. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. ■ Scripts over secure connection You can select whether to allow the running of scripts from a secure page.
3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or save the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed.
■ Service inbox The phone is able to receive service messages (pushed messages) sent by your service provider (network service). Service messages are notifications of, for example, news headlines, and they may contain a text message or an address of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.
On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message. ■ Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.
■ Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature.
Certificates Important: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown. Check that the header text is Read and that the digital signature icon shown.
17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
18. PC connectivity You can send and receive email, and access the Internet when your phone is connected to a compatible PC through an infrared or a data cable (CA-42) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ PC Suite With PC Suite you can synchronize Contacts, calendar and to-do notes, and notes between your phone, and the compatible PC, or a remote Internet server (network service).
■ Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. For better performance during data calls, place the phone on a stationary surface with the keypad facing down. Do not move the phone by holding it in your hand during a data call. Copyright © 2005 Nokia. All rights reserved.
19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively. 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery. Copyright © 2005 Nokia. All rights reserved.
CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Copyright © 2005 Nokia. All rights reserved.
Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 6 inches (15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
■ Certification information (SAR) THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com. Copyright © 2005 Nokia. All rights reserved.
