SUPPORT GUIDE FOR THE NOKIA 6100 WITH AN INFRARED DATA CONNECTION IN A POCKET PC DEVICE Copyright © Nokia. All rights reserved | Date: 19.11.02, ver. 1.
Contents 1. INTRODUCTION .............................................................................................................. 1 2. MAKING A DIAL-UP CONNECTION................................................................................ 1 Copyright © Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
1. INTRODUCTION How to configure Pocket PC 2002 device to function with Nokia 6100 phone as a modem with it • Pocket PC 2002 device and Nokia 6100 phone are the basic requirements • Data services (at least outgoing data) should be activated in order to be able to make data calls • Good GSM coverage and a well-charged battery in both devices as the data connection's power consumption is usually quite high.
9. Tap on the “Advanced…” button (Figure 4.) to verify the connection preferences. After that tap on the “OK” on the top right corner of the screen. Figure 3. Figure 4. 10. Tap “Next” button and enter the phone number 10.1. For GPRS connection type *99# as phone number (please verify from your GPRS service provider) without area code or country code. And for normal modem connection enter your Internet Service Provider’s phone number. Tap “Next” 11. Uncheck the “Wait for dial tone before dialing” and 12.
14. Tap “Connect” 15. If you are making a GPRS connection you can usually leave the username, password and domain fields empty (Please verify from your GPRS service provider). If you are making a normal modem connection to your ISP you usually need to enter your username and password fields. 16. After a second the GPRS session starts or if making a dial-up connection the phone starts to dial. 17. When the message “connected” appears, you are on-line. 18.
