User Guide

PAMS
Technical Documentation
NME–3
Service Software Instructions
Page 63
Issue 1 10/99
Restore User Defaults... command
Activation Status Bar Text
Alt, D,R Open Restore Default User Settings.
This command is used to restore Default User Settings, if they have degenerated. Dia-
log may be opened from menu, or is opened automatically, when loading or saving user
settings fails or is skipped during flashing (see Flash Phone... command). The dialog
is also opened after full factory set.
Default settings are loaded from files in product specific subdirectory of WinTesla direc-
tory e.g. for NME–3 this directory could be
c:\wintesla\nme–3 . Into these directories
user should unpack all flash packages. Market areas and corresponding files are de-
scribed in INI–file in product specific subdirectory e.g. for NME–3 this file would be
c:\wintesla\nme–3\nme–3.ini . INI–file is common to all flash packages, but market
areas are added to Market Area list, when new flash packages are unpacked to product
specific subdirectory.
Selecting Restore User Defaults opens following Restore Default User Settings dialog.
Note: This is a screen example. Actually enabled settings may differ.
Dialog mode: modal
Restore Default User Settings dialog box has following items:
Default Settings static text:
User can check one or more check boxes to restore corre-
sponding defaults from file to ME. Check boxes are disabled/
enabled according to settings available in selected Market
Area.