User Guide

PAMS
Technical Documentation
NME–3
Service Software Instructions
Page 46
Issue 1 10/99
Keypad Light – Box :
1. Light off
The Keypad light is switched off, by activating this Radio button.
2. Light 75%
The Keypad light is dimmed to 75%, by activating this Radio button.
3. Light 100%
The Keypad light is dimmed to 100%, by activating this Radio button.
Close button:
Closes the dialog and clears the handset light.
During LCD Light test the intensity of the light can be checked easily by
the service stuff.
Only the keypad light cannot check during daylight.
A possible method to verify the control of the keypad light is to measure
the current consumption of the Handset. The increase of current is around
30mA from Light off to Light 100%.
SIM Switch and HOOK Test
Activation Status Bar Text Menu
ALT+E, M SIM switch and HOOK Test dialog. HS alone
ALT+E, H, M “ RU & HS
During this test a timer–controlled scan is running.
In this scan the status of the SIM switch and the status of the HOOK
sensor is reported to
the WinTesla test program.