User Guide

PAMS
Technical Documentation
NME–3
Service Software Instructions
Page 44
Issue 1 10/99
Keypad... command
Activation Status Bar Text Menu
ALT+E, K Open Keypad Test dialog. HS alone
ALT+E, H, K “ RU & HS
This function is used to test the keypad.
After selection, the following dialog is opened:
After opening the dialog the keypad testmode is started automatically.
This means that the keypad events are not longer routed to the UI.
Instead they are collected in a buffer.
The test is performed in an auto scan mode.
The scan interval is 250milliseconds.
There is no fixed sequence for the key pressing order.
Keypad Test dialog has following items:
HS layout with key status
Every key of the Handset is present as a Check Button or a Radio Button.
At the test begin the buttons are not active. After pressing the keys of the
HS the status of the display buttons can have 3 different states.
Possible status values are: