User Guide

PAMS
Technical Documentation
NME–3
Service Software Instructions
Page 24
Issue 1 10/99
The TX Power Tuning dialog will be activated automatically after value selection.
Dialog mode: modal
TX Power Tuning dialog has following items:
Power Level & Coefficients list box (ALT+L):
The power is presented in GSM or values. The base power is selected automatically
when the dialog is opened. The test value is not saved to the EEPROM. The test value
can be changed during tuning as other power coefficients and the program remembers
its value when tuning function is activated later again.
If there is more power levels in the phone that can fit into window the window is scrol-
lable. When phone is initialised the program asks the number of power levels used in the
phone.
Only six power coefficients are needed to tune (left justified Coefficients) and the rest of
them are calculated.
The tuning position is highlighted and can be tuned with +/– keys or left/right cursor
keys.
Calculate button (ALT+A):
The calculation is activated with this button. The power coefficients which are calculated
from the tuned coefficients are displayed on the different columns than the others. All
values can be tuned if needed.
Save button (ENTER):
Dialog is closed and tuned values are
saved to phone.