User Guide

PAMS

Technical Documentation

NME–3

Mechanical Parts Assembly Instructions

Page 7

Issue 1 10/99

• Turn unit over to the keymat side

• 2 screws (13) trough A – cover

into B – cover domes

(400 rpm, 30Ncm)

• Verify that A – and B – cover are properly closed by

checking that the gap between them is constant all

arround the Handset

GAP

• Clean window with compressed air

• Pull window adhesive protection foil off the A – cover

and ensure, that the adhesive foil does not lift at the

finger lift side.

• Press window (1) to A – cover, top side first

• Press the window down till it clips home

• Press down the window to ensure fixation to B –

cover

• Attach protection foil to mounted window