User Guide

Settings
73
Personal configuration settings — to add new personal accounts for various services
manually and to activate or delete them. To add a new personal account, if you
have not added any, select Add new. Otherwise, select Options > Add new. Select
the service type and enter each of the required parameters. The parameters differ
according to the selected service type. To delete or activate a personal account,
scroll to it, and select Options > Delete or Activate.
■ Security
When security features that restrict calls are in use (such as, call restricting, closed
user group, and fixed dialing) calls still may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and one of the following options:
PIN code request — to set the phone to ask for your PIN or UPIN code every time the
phone is switched on. Some SIM cards do not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your phone
(network service). A password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers, if this
function is supported by your SIM card.
Closed user group — to specify a group of people whom you can call and who can
call you (network service).
Security level > Phone — the phone asks for the security code whenever a new
SIM card is inserted into the phone. Select Memory and the phone asks for the
security code when the SIM card’s memory is selected and you want to change
the memory in use.
Access codes — to set the PIN code or UPIN code in use or to change the security
code, PIN code, UPIN code, PIN2 code, and call restrictions password.
Code in use — to select whether the PIN code or UPIN code should be active.
Authority certificates or User certificates — to view the list of the authority or user
certificates downloaded into your phone. See “Certificates,” p. 31.
Security module settings — to view Security module details, activate Module PIN
request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.
■ Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore settings and enter the security code. Data that you have
entered or downloaded is not deleted. For example, names and numbers in
Phonebook are not affected.